epoll is now supported on non-Linux platforms (namely illumos).

Renamed MHD options and updated documentation.

doc/libmicrohttpd.texi

@@ -168,9 +168,9 @@ thread-per-connection (MHD creates one listen thread and then one
 thread per accepted connection).
 
 These thread modes are then combined with the event loop styles.
-MHD support select, poll and epoll.  epoll is only available on
-Linux, poll may not be available on some platforms.  Note that
-it is possible to combine MHD using epoll with an external
+MHD support select, poll and epoll.  select is available on all
+platforms, epoll and poll may not be available on some platforms.
+Note that it is possible to combine MHD using epoll with an external
 select-based event loop.
 
 The default (if no other option is passed) is ``external select''.
@@ -203,8 +203,8 @@ request within the callbacks from MHD must use a thread per
 connection.  This is typically rather costly.  Applications that do
 not support threads or that must run on embedded devices without
 thread-support must use the external mode.  Using @code{epoll} is only
-supported on Linux, thus portable applications must at least have a
-fallback option available.  @ref{tbl:supported} lists the sane
+supported on some platform, thus portable applications must at least
+have a fallback option available.  @ref{tbl:supported} lists the sane
 combinations.
 
 @float Table,tbl:supported
@@ -265,7 +265,7 @@ do not include the post processor API (results in binary incompatibility)
 do not include the authentication APIs (results in binary incompatibility)
 
 @item ``--disable-epoll
-do not include epoll support, even on Linux (minimally smaller binary size, good for testing portability to non-Linux systems)
+do not include epoll support, even if it supported (minimally smaller binary size, good for portability testing)
 
 @item ``--enable-coverage''
 set flags for analysis of code-coverage with gcc/gcov (results in slow, large binaries)
@@ -504,15 +504,15 @@ conjunction with @code{MHD_USE_THREAD_PER_CONNECTION} or
 @code{MHD_USE_POLL} and the local platform does not support it,
 @code{MHD_start_daemon} will return NULL.
 
-@item MHD_USE_EPOLL_LINUX_ONLY
+@item MHD_USE_EPOLL
 @cindex FD_SETSIZE
 @cindex epoll
 @cindex select
 Use @code{epoll()} instead of @code{poll()} or @code{select()}. This
 allows sockets with descriptors @code{>= FD_SETSIZE}.  This option is
-only available on Linux systems and does not work in conjunction with
+only available on some systems and does not work in conjunction with
 @code{MHD_USE_THREAD_PER_CONNECTION} (at this point).  If you specify
-@code{MHD_USE_EPOLL_LINUX_ONLY} and the local platform does not
+@code{MHD_USE_EPOLL} and the local platform does not
 support it, @code{MHD_start_daemon} will return NULL.  Using
 @code{epoll()} instead of @code{select()} or @code{poll()} can in some
 situations result in significantly higher performance as the system
@@ -524,7 +524,7 @@ open connections).
 @cindex performance
 Enable optimizations to aggressively improve performance.  Note that
 the option is a slight misnomer, as these days it also enables optimziations
-that are unrelated to @code{MHD_USE_EPOLL_LINUX_ONLY}.  Hence it is OK to
+that are unrelated to @code{MHD_USE_EPOLL}.  Hence it is OK to
 use this option with other event loops.
 
 Currently, the optimizations this option enables are based on
@@ -2550,7 +2550,7 @@ No extra arguments should be passed.
 Request the file-descriptor number that MHD is using for epoll.  If
 the build is not supporting epoll, NULL is returned; if we are using a
 thread pool or this daemon was not started with
-@code{MHD_USE_EPOLL_LINUX_ONLY}, (a pointer to) -1 is returned.  If we are
+@code{MHD_USE_EPOLL}, (a pointer to) -1 is returned.  If we are
 using @code{MHD_USE_SELECT_INTERNALLY} or are in 'external' select mode, the
 internal epoll FD is returned.  This function must be used in external
 select mode with epoll to obtain the FD to call epoll on.  No extra
@@ -2763,8 +2763,8 @@ MHD_USE_POLL can be used.
 
 @item MHD_FEATURE_EPOLL
 Get whether @code{epoll()} is supported. If supported then Flags
-MHD_USE_EPOLL_LINUX_ONLY and
-MHD_USE_EPOLL_INTERNALLY_LINUX_ONLY can be used.
+MHD_USE_EPOLL and
+MHD_USE_EPOLL_INTERNALLY can be used.
 
 @item MHD_FEATURE_SHUTDOWN_LISTEN_SOCKET
 Get whether shutdown on listen socket to signal other

src/examples/benchmark.c

@@ -136,7 +136,7 @@ main (int argc, char *const *argv)
 #endif
   d = MHD_start_daemon (MHD_USE_SELECT_INTERNALLY | MHD_SUPPRESS_DATE_NO_CLOCK
 #ifdef EPOLL_SUPPORT
-			| MHD_USE_EPOLL_LINUX_ONLY | MHD_USE_EPOLL_TURBO
+			| MHD_USE_EPOLL | MHD_USE_EPOLL_TURBO
 #endif
 			,
                         atoi (argv[1]),

src/examples/benchmark_https.c

@@ -182,7 +182,7 @@ main (int argc, char *const *argv)
 					      MHD_RESPMEM_PERSISTENT);
   d = MHD_start_daemon (MHD_USE_SELECT_INTERNALLY | MHD_USE_SSL
 #ifdef EPOLL_SUPPORT
-			| MHD_USE_EPOLL_LINUX_ONLY  | MHD_USE_EPOLL_TURBO
+			| MHD_USE_EPOLL | MHD_USE_EPOLL_TURBO
 #endif
 			,
                         atoi (argv[1]),

src/examples/demo.c

@@ -885,7 +885,7 @@ main (int argc, char *const *argv)
   update_directory ();
   d = MHD_start_daemon (MHD_USE_SELECT_INTERNALLY | MHD_USE_DEBUG
 #ifdef EPOLL_SUPPORT
-			| MHD_USE_EPOLL_LINUX_ONLY
+			| MHD_USE_EPOLL
 #endif
 			,
                         port,

src/examples/demo_https.c

@@ -934,7 +934,7 @@ main (int argc, char *const *argv)
   update_directory ();
   d = MHD_start_daemon (MHD_USE_SELECT_INTERNALLY | MHD_USE_DEBUG | MHD_USE_SSL
 #ifdef EPOLL_SUPPORT
-			| MHD_USE_EPOLL_LINUX_ONLY
+			| MHD_USE_EPOLL
 #endif
 			,
                         port,

src/include/microhttpd.h

@@ -126,7 +126,7 @@ typedef intptr_t ssize_t;
  * Current version of the library.
  * 0x01093001 = 1.9.30-1.
  */
-#define MHD_VERSION 0x00095008
+#define MHD_VERSION 0x00095009
 
 /**
  * MHD-internal return code for "YES".
@@ -577,7 +577,7 @@ enum MHD_FLAG
    * FD_SETSIZE`.  This option is not compatible with using an
    * 'external' `select()` mode (as there is no API to get the file
    * descriptors for the external select from MHD) and must also not
-   * be used in combination with #MHD_USE_EPOLL_LINUX_ONLY.
+   * be used in combination with #MHD_USE_EPOLL.
    */
   MHD_USE_POLL = 64,
 
@@ -605,18 +605,29 @@ enum MHD_FLAG
 
   /**
    * Use `epoll()` instead of `select()` or `poll()` for the event loop.
-   * This option is only available on Linux; using the option on
-   * non-Linux systems will cause #MHD_start_daemon to fail.  Using
+   * This option is only available on some systems; using the option on
+   * systems without epoll will cause #MHD_start_daemon to fail.  Using
    * this option is not supported with #MHD_USE_THREAD_PER_CONNECTION.
+   * @sa ::MHD_FEATURE_EPOLL
    */
-  MHD_USE_EPOLL_LINUX_ONLY = 512,
+  MHD_USE_EPOLL = 512,
+
+/** @deprecated */
+#define MHD_USE_EPOLL_LINUX_ONLY \
+  _MHD_DEPR_IN_MACRO("Value MHD_USE_EPOLL_LINUX_ONLY is deprecated, use MHD_USE_EPOLL") \
+  MHD_USE_EPOLL
 
   /**
    * Run using an internal thread (or thread pool) doing `epoll()`.
    * This option is only available on Linux; using the option on
    * non-Linux systems will cause #MHD_start_daemon to fail.
    */
-  MHD_USE_EPOLL_INTERNALLY_LINUX_ONLY = MHD_USE_SELECT_INTERNALLY | MHD_USE_EPOLL_LINUX_ONLY,
+  MHD_USE_EPOLL_INTERNALLY = MHD_USE_SELECT_INTERNALLY | MHD_USE_EPOLL,
+
+/** @deprecated */
+#define MHD_USE_EPOLL_INTERNALLY_LINUX_ONLY \
+  _MHD_DEPR_IN_MACRO("Value MHD_USE_EPOLL_INTERNALLY_LINUX_ONLY is deprecated, use MHD_USE_EPOLL_INTERNALLY") \
+  MHD_USE_EPOLL_INTERNALLY
 
   /**
    * Force MHD to use a signal pipe to notify the event loop (of
@@ -644,7 +655,7 @@ enum MHD_FLAG
   /**
    * Enable `epoll()` turbo.  Disables certain calls to `shutdown()`
    * and enables aggressive non-blocking optimisitc reads.
-   * Most effects only happen with #MHD_USE_EPOLL_LINUX_ONLY.
+   * Most effects only happen with #MHD_USE_EPOLL.
    * Enalbed always on W32 as winsock does not properly behave
    * with `shutdown()` and this then fixes potential problems.
    */
@@ -2750,8 +2761,8 @@ enum MHD_FEATURE
 
   /**
    * Get whether `epoll()` is supported. If supported then Flags
-   * #MHD_USE_EPOLL_LINUX_ONLY and
-   * #MHD_USE_EPOLL_INTERNALLY_LINUX_ONLY can be used.
+   * #MHD_USE_EPOLL and
+   * #MHD_USE_EPOLL_INTERNALLY can be used.
    */
   MHD_FEATURE_EPOLL = 7,
 

src/microhttpd/connection.c

@@ -2895,7 +2895,7 @@ MHD_connection_handle_idle (struct MHD_Connection *connection)
     }
   MHD_connection_update_event_loop_info (connection);
 #ifdef EPOLL_SUPPORT
-  if (0 != (daemon->options & MHD_USE_EPOLL_LINUX_ONLY))
+  if (0 != (daemon->options & MHD_USE_EPOLL))
     {
       switch (connection->event_loop_info)
         {
@@ -2959,7 +2959,7 @@ MHD_connection_epoll_update_ (struct MHD_Connection *connection)
 {
   struct MHD_Daemon *daemon = connection->daemon;
 
-  if ( (0 != (daemon->options & MHD_USE_EPOLL_LINUX_ONLY)) &&
+  if ( (0 != (daemon->options & MHD_USE_EPOLL)) &&
        (0 == (connection->epoll_state & MHD_EPOLL_STATE_IN_EPOLL_SET)) &&
        (0 == (connection->epoll_state & MHD_EPOLL_STATE_SUSPENDED)) &&
        ( (0 == (connection->epoll_state & MHD_EPOLL_STATE_WRITE_READY)) ||

src/microhttpd/daemon.c

@@ -664,7 +664,7 @@ MHD_get_fdset2 (struct MHD_Daemon *daemon,
        || (0 != (daemon->options & MHD_USE_POLL)))
     return MHD_NO;
 #ifdef EPOLL_SUPPORT
-  if (0 != (daemon->options & MHD_USE_EPOLL_LINUX_ONLY))
+  if (0 != (daemon->options & MHD_USE_EPOLL))
     {
       /* we're in epoll mode, use the epoll FD as a stand-in for
 	 the entire event set */
@@ -1240,7 +1240,7 @@ internal_add_connection (struct MHD_Daemon *daemon,
     }
 
   if ( (!MHD_SCKT_FD_FITS_FDSET_(client_socket, NULL)) &&
-       (0 == (daemon->options & (MHD_USE_POLL | MHD_USE_EPOLL_LINUX_ONLY))) )
+       (0 == (daemon->options & (MHD_USE_POLL | MHD_USE_EPOLL))) )
     {
 #ifdef HAVE_MESSAGES
       MHD_DLOG (daemon,
@@ -1486,7 +1486,7 @@ internal_add_connection (struct MHD_Daemon *daemon,
 #endif
       }
 #ifdef EPOLL_SUPPORT
-  if (0 != (daemon->options & MHD_USE_EPOLL_LINUX_ONLY))
+  if (0 != (daemon->options & MHD_USE_EPOLL))
     {
       if (0 == (daemon->options & MHD_USE_EPOLL_TURBO))
 	{
@@ -1611,7 +1611,7 @@ MHD_suspend_connection (struct MHD_Connection *connection)
               daemon->suspended_connections_tail,
               connection);
 #ifdef EPOLL_SUPPORT
-  if (0 != (daemon->options & MHD_USE_EPOLL_LINUX_ONLY))
+  if (0 != (daemon->options & MHD_USE_EPOLL))
     {
       if (0 != (connection->epoll_state & MHD_EPOLL_STATE_IN_EREADY_EDLL))
         {
@@ -1729,7 +1729,7 @@ resume_suspended_connections (struct MHD_Daemon *daemon)
                          pos);
         }
 #ifdef EPOLL_SUPPORT
-      if (0 != (daemon->options & MHD_USE_EPOLL_LINUX_ONLY))
+      if (0 != (daemon->options & MHD_USE_EPOLL))
         {
           if (0 != (pos->epoll_state & MHD_EPOLL_STATE_IN_EREADY_EDLL))
             MHD_PANIC ("Resumed connection was already in EREADY set\n");
@@ -1971,7 +1971,7 @@ MHD_cleanup_connections (struct MHD_Daemon *daemon)
                                    MHD_CONNECTION_NOTIFY_CLOSED);
       MHD_ip_limit_del (daemon, pos->addr, pos->addr_len);
 #ifdef EPOLL_SUPPORT
-      if (0 != (daemon->options & MHD_USE_EPOLL_LINUX_ONLY))
+      if (0 != (daemon->options & MHD_USE_EPOLL))
         {
           if (0 != (pos->epoll_state & MHD_EPOLL_STATE_IN_EREADY_EDLL))
             {
@@ -2138,7 +2138,7 @@ MHD_run_from_select (struct MHD_Daemon *daemon,
   MHD_socket ds;
   struct MHD_Connection *pos;
   struct MHD_Connection *next;
-  unsigned int mask = MHD_USE_SUSPEND_RESUME | MHD_USE_EPOLL_INTERNALLY_LINUX_ONLY |
+  unsigned int mask = MHD_USE_SUSPEND_RESUME | MHD_USE_EPOLL_INTERNALLY |
     MHD_USE_SELECT_INTERNALLY | MHD_USE_POLL_INTERNALLY | MHD_USE_THREAD_PER_CONNECTION;
 
   /* drain signaling pipe to avoid spinning select */
@@ -2153,7 +2153,7 @@ MHD_run_from_select (struct MHD_Daemon *daemon,
     resume_suspended_connections (daemon);
 
 #ifdef EPOLL_SUPPORT
-  if (0 != (daemon->options & MHD_USE_EPOLL_LINUX_ONLY))
+  if (0 != (daemon->options & MHD_USE_EPOLL))
     {
       /* we're in epoll mode, the epoll FD stands for
 	 the entire event set! */
@@ -2834,7 +2834,7 @@ MHD_run (struct MHD_Daemon *daemon)
     MHD_cleanup_connections (daemon);
   }
 #ifdef EPOLL_SUPPORT
-  else if (0 != (daemon->options & MHD_USE_EPOLL_LINUX_ONLY))
+  else if (0 != (daemon->options & MHD_USE_EPOLL))
   {
     MHD_epoll (daemon, MHD_NO);
     MHD_cleanup_connections (daemon);
@@ -2866,7 +2866,7 @@ MHD_select_thread (void *cls)
       if (0 != (daemon->options & MHD_USE_POLL))
 	MHD_poll (daemon, MHD_YES);
 #ifdef EPOLL_SUPPORT
-      else if (0 != (daemon->options & MHD_USE_EPOLL_LINUX_ONLY))
+      else if (0 != (daemon->options & MHD_USE_EPOLL))
 	MHD_epoll (daemon, MHD_YES);
 #endif
       else
@@ -2973,7 +2973,7 @@ MHD_quiesce_daemon (struct MHD_Daemon *daemon)
       {
 	daemon->worker_pool[i].socket_fd = MHD_INVALID_SOCKET;
 #ifdef EPOLL_SUPPORT
-	if ( (0 != (daemon->options & MHD_USE_EPOLL_LINUX_ONLY)) &&
+	if ( (0 != (daemon->options & MHD_USE_EPOLL)) &&
 	     (-1 != daemon->worker_pool[i].epoll_fd) &&
 	     (MHD_YES == daemon->worker_pool[i].listen_socket_in_epoll) )
 	  {
@@ -2994,7 +2994,7 @@ MHD_quiesce_daemon (struct MHD_Daemon *daemon)
       }
   daemon->socket_fd = MHD_INVALID_SOCKET;
 #ifdef EPOLL_SUPPORT
-  if ( (0 != (daemon->options & MHD_USE_EPOLL_LINUX_ONLY)) &&
+  if ( (0 != (daemon->options & MHD_USE_EPOLL)) &&
        (-1 != daemon->epoll_fd) &&
        (MHD_YES == daemon->listen_socket_in_epoll) )
     {
@@ -3628,7 +3628,7 @@ MHD_start_daemon_va (unsigned int flags,
 #endif
       }
   }
-  if ( (0 == (flags & (MHD_USE_POLL | MHD_USE_EPOLL_LINUX_ONLY))) &&
+  if ( (0 == (flags & (MHD_USE_POLL | MHD_USE_EPOLL))) &&
        (1 == use_pipe) &&
        (!MHD_SCKT_FD_FITS_FDSET_(daemon->wpipe[0], NULL)) )
     {
@@ -3974,7 +3974,7 @@ MHD_start_daemon_va (unsigned int flags,
                 "Failed to set nonblocking mode on listening socket: %s\n",
                 MHD_socket_last_strerr_());
 #endif
-      if (0 != (flags & MHD_USE_EPOLL_LINUX_ONLY) ||
+      if (0 != (flags & MHD_USE_EPOLL) ||
           daemon->worker_pool_size > 0)
         {
            /* Accept must be non-blocking. Multiple children may wake up
@@ -3986,7 +3986,7 @@ MHD_start_daemon_va (unsigned int flags,
         }
     }
   if ( (!MHD_SCKT_FD_FITS_FDSET_(socket_fd, NULL)) &&
-       (0 == (flags & (MHD_USE_POLL | MHD_USE_EPOLL_LINUX_ONLY)) ) )
+       (0 == (flags & (MHD_USE_POLL | MHD_USE_EPOLL)) ) )
     {
 #ifdef HAVE_MESSAGES
       MHD_DLOG (daemon,
@@ -4000,7 +4000,7 @@ MHD_start_daemon_va (unsigned int flags,
     }
 
 #ifdef EPOLL_SUPPORT
-  if ( (0 != (flags & MHD_USE_EPOLL_LINUX_ONLY)) &&
+  if ( (0 != (flags & MHD_USE_EPOLL)) &&
        (0 == daemon->worker_pool_size) &&
        (0 == (daemon->options & MHD_USE_NO_LISTEN_SOCKET)) )
     {
@@ -4008,7 +4008,7 @@ MHD_start_daemon_va (unsigned int flags,
 	{
 #ifdef HAVE_MESSAGES
 	  MHD_DLOG (daemon,
-		    "Combining MHD_USE_THREAD_PER_CONNECTION and MHD_USE_EPOLL_LINUX_ONLY is not supported.\n");
+		    "Combining MHD_USE_THREAD_PER_CONNECTION and MHD_USE_EPOLL is not supported.\n");
 #endif
 	  goto free_and_fail;
 	}
@@ -4016,7 +4016,7 @@ MHD_start_daemon_va (unsigned int flags,
 	goto free_and_fail;
     }
 #else
-  if (0 != (flags & MHD_USE_EPOLL_LINUX_ONLY))
+  if (0 != (flags & MHD_USE_EPOLL))
     {
 #ifdef HAVE_MESSAGES
       MHD_DLOG (daemon,
@@ -4152,7 +4152,7 @@ MHD_start_daemon_va (unsigned int flags,
 #endif
                 }
             }
-          if ( (0 == (flags & (MHD_USE_POLL | MHD_USE_EPOLL_LINUX_ONLY))) &&
+          if ( (0 == (flags & (MHD_USE_POLL | MHD_USE_EPOLL))) &&
                (!MHD_SCKT_FD_FITS_FDSET_(d->wpipe[0], NULL)) )
             {
 #ifdef HAVE_MESSAGES
@@ -4173,7 +4173,7 @@ MHD_start_daemon_va (unsigned int flags,
           if (i < leftover_conns)
             ++d->connection_limit;
 #ifdef EPOLL_SUPPORT
-	  if ( (0 != (daemon->options & MHD_USE_EPOLL_LINUX_ONLY)) &&
+	  if ( (0 != (daemon->options & MHD_USE_EPOLL)) &&
 	       (MHD_YES != setup_epoll_to_listen (d)) )
 	    goto thread_failed;
 #endif
@@ -4418,7 +4418,7 @@ MHD_stop_daemon (struct MHD_Daemon *daemon)
 	  daemon->worker_pool[i].shutdown = MHD_YES;
 	  daemon->worker_pool[i].socket_fd = MHD_INVALID_SOCKET;
 #ifdef EPOLL_SUPPORT
-	  if ( (0 != (daemon->options & MHD_USE_EPOLL_LINUX_ONLY)) &&
+	  if ( (0 != (daemon->options & MHD_USE_EPOLL)) &&
 	       (-1 != daemon->worker_pool[i].epoll_fd) &&
 	       (MHD_INVALID_SOCKET == fd) )
 	    epoll_shutdown (&daemon->worker_pool[i]);
@@ -4440,7 +4440,7 @@ MHD_stop_daemon (struct MHD_Daemon *daemon)
     }
 #endif
 #ifdef EPOLL_SUPPORT
-  if ( (0 != (daemon->options & MHD_USE_EPOLL_LINUX_ONLY)) &&
+  if ( (0 != (daemon->options & MHD_USE_EPOLL)) &&
        (-1 != daemon->epoll_fd) &&
        (MHD_INVALID_SOCKET == fd) )
     epoll_shutdown (daemon);
@@ -4521,7 +4521,7 @@ MHD_stop_daemon (struct MHD_Daemon *daemon)
     }
 #endif
 #ifdef EPOLL_SUPPORT
-  if ( (0 != (daemon->options & MHD_USE_EPOLL_LINUX_ONLY)) &&
+  if ( (0 != (daemon->options & MHD_USE_EPOLL)) &&
        (-1 != daemon->epoll_fd) &&
        (0 != MHD_socket_close_ (daemon->epoll_fd)) )
     MHD_PANIC ("close failed\n");

src/testcurl/https/test_https_get_parallel.c

@@ -151,7 +151,7 @@ main (int argc, char *const *argv)
   errorCount +=
     test_wrap ("single threaded daemon, single client, epoll", &test_single_client,
                NULL,
-               MHD_USE_SELECT_INTERNALLY | MHD_USE_SSL | MHD_USE_DEBUG | MHD_USE_EPOLL_LINUX_ONLY,
+               MHD_USE_SELECT_INTERNALLY | MHD_USE_SSL | MHD_USE_DEBUG | MHD_USE_EPOLL,
                aes256_sha, CURL_SSLVERSION_TLSv1, MHD_OPTION_HTTPS_MEM_KEY,
                srv_key_pem, MHD_OPTION_HTTPS_MEM_CERT,
                srv_self_signed_cert_pem, MHD_OPTION_END);
@@ -167,7 +167,7 @@ main (int argc, char *const *argv)
   errorCount +=
     test_wrap ("single threaded daemon, parallel clients, epoll",
                &test_parallel_clients, NULL,
-               MHD_USE_SELECT_INTERNALLY | MHD_USE_SSL | MHD_USE_DEBUG | MHD_USE_EPOLL_LINUX_ONLY,
+               MHD_USE_SELECT_INTERNALLY | MHD_USE_SSL | MHD_USE_DEBUG | MHD_USE_EPOLL,
                aes256_sha, CURL_SSLVERSION_TLSv1, MHD_OPTION_HTTPS_MEM_KEY,
                srv_key_pem, MHD_OPTION_HTTPS_MEM_CERT,
                srv_self_signed_cert_pem, MHD_OPTION_END);

src/testcurl/https/test_https_get_select.c

@@ -224,7 +224,7 @@ main (int argc, char *const *argv)
       return -1;
     }
 #ifdef EPOLL_SUPPORT
-  if (0 != (errorCount = testExternalGet (MHD_USE_EPOLL_LINUX_ONLY)))
+  if (0 != (errorCount = testExternalGet (MHD_USE_EPOLL)))
     fprintf (stderr, "Fail: %d\n", errorCount);
 #endif
   if (0 != (errorCount = testExternalGet (0)))

src/testcurl/perf_get.c

@@ -227,7 +227,7 @@ testInternalGet (int port, int poll_flag)
       curl_easy_cleanup (c);
     }
   stop (poll_flag == MHD_USE_POLL ? "internal poll" :
-	poll_flag == MHD_USE_EPOLL_LINUX_ONLY ? "internal epoll" : "internal select");
+	poll_flag == MHD_USE_EPOLL ? "internal epoll" : "internal select");
   MHD_stop_daemon (d);
   if (cbc.pos != strlen ("/hello_world"))
     return 4;
@@ -287,7 +287,7 @@ testMultithreadedGet (int port, int poll_flag)
       curl_easy_cleanup (c);
     }
   stop ((poll_flag & MHD_USE_POLL) ? "thread with poll" :
-	(poll_flag & MHD_USE_EPOLL_LINUX_ONLY) ? "thread with epoll" : "thread with select");
+	(poll_flag & MHD_USE_EPOLL) ? "thread with epoll" : "thread with select");
   MHD_stop_daemon (d);
   if (cbc.pos != strlen ("/hello_world"))
     return 64;
@@ -347,7 +347,7 @@ testMultithreadedPoolGet (int port, int poll_flag)
       curl_easy_cleanup (c);
     }
   stop (0 != (poll_flag & MHD_USE_POLL) ? "thread pool with poll" : 
-	0 != (poll_flag & MHD_USE_EPOLL_LINUX_ONLY) ? "thread pool with epoll" : "thread pool with select");
+	0 != (poll_flag & MHD_USE_EPOLL) ? "thread pool with epoll" : "thread pool with select");
   MHD_stop_daemon (d);
   if (cbc.pos != strlen ("/hello_world"))
     return 64;
@@ -527,8 +527,8 @@ main (int argc, char *const *argv)
     }
   if (MHD_YES == MHD_is_feature_supported(MHD_FEATURE_EPOLL))
     {
-      errorCount += testInternalGet(port++, MHD_USE_EPOLL_LINUX_ONLY);
-      errorCount += testMultithreadedPoolGet(port++, MHD_USE_EPOLL_LINUX_ONLY);
+      errorCount += testInternalGet(port++, MHD_USE_EPOLL);
+      errorCount += testMultithreadedPoolGet(port++, MHD_USE_EPOLL);
     }
   MHD_destroy_response (response);
   if (errorCount != 0)

src/testcurl/perf_get_concurrent.c

@@ -399,8 +399,8 @@ main (int argc, char *const *argv)
     }
   if (MHD_YES == MHD_is_feature_supported(MHD_FEATURE_EPOLL))
     {
-      errorCount += testInternalGet (port++, MHD_USE_EPOLL_LINUX_ONLY);
-      errorCount += testMultithreadedPoolGet (port++, MHD_USE_EPOLL_LINUX_ONLY);
+      errorCount += testInternalGet (port++, MHD_USE_EPOLL);
+      errorCount += testMultithreadedPoolGet (port++, MHD_USE_EPOLL);
     }
   MHD_destroy_response (response);
   if (errorCount != 0)

src/testcurl/test_get.c

@@ -634,10 +634,10 @@ main (int argc, char *const *argv)
     }
   if (MHD_YES == MHD_is_feature_supported(MHD_FEATURE_EPOLL))
     {
-      errorCount += testInternalGet(MHD_USE_EPOLL_LINUX_ONLY);
-      errorCount += testMultithreadedPoolGet(MHD_USE_EPOLL_LINUX_ONLY);
-      errorCount += testUnknownPortGet(MHD_USE_EPOLL_LINUX_ONLY);
-      errorCount += testEmptyGet(MHD_USE_EPOLL_LINUX_ONLY);
+      errorCount += testInternalGet(MHD_USE_EPOLL);
+      errorCount += testMultithreadedPoolGet(MHD_USE_EPOLL);
+      errorCount += testUnknownPortGet(MHD_USE_EPOLL);
+      errorCount += testEmptyGet(MHD_USE_EPOLL);
     }
   if (errorCount != 0)
     fprintf (stderr, "Error (code: %u)\n", errorCount);

src/testcurl/test_quiesce.c

@@ -482,8 +482,8 @@ main (int argc, char *const *argv)
     }
   if (MHD_YES == MHD_is_feature_supported(MHD_FEATURE_EPOLL))
     {
-      errorCount += testGet (MHD_USE_SELECT_INTERNALLY, 0, MHD_USE_EPOLL_LINUX_ONLY);
-      errorCount += testGet (MHD_USE_SELECT_INTERNALLY, CPU_COUNT, MHD_USE_EPOLL_LINUX_ONLY);
+      errorCount += testGet (MHD_USE_SELECT_INTERNALLY, 0, MHD_USE_EPOLL);
+      errorCount += testGet (MHD_USE_SELECT_INTERNALLY, CPU_COUNT, MHD_USE_EPOLL);
     }
   if (errorCount != 0)
     fprintf (stderr, "Error (code: %u)\n", errorCount);

src/testcurl/test_start_stop.c

@@ -120,8 +120,8 @@ main (int argc, char *const *argv)
     }
   if (MHD_YES == MHD_is_feature_supported(MHD_FEATURE_EPOLL))
     {
-      errorCount += testInternalGet(MHD_USE_EPOLL_LINUX_ONLY);
-      errorCount += testMultithreadedPoolGet(MHD_USE_EPOLL_LINUX_ONLY);
+      errorCount += testInternalGet(MHD_USE_EPOLL);
+      errorCount += testMultithreadedPoolGet(MHD_USE_EPOLL);
     }
   if (errorCount != 0)
     fprintf (stderr, "Error (code: %u)\n", errorCount);