video: fix DISOpticalFlow heap-buffer-overflow with patch_size > border_size - #29715Fixes#20185.
### What
`DISOpticalFlowImpl` pads `I1` of every pyramid level with a **fixed 16 pixel border** (`border_size`), while `PatchInverseSearch` clamps a patch's sample position to:
```cpp
float i_lower_limit = bsz - psz + 1.0f; // bsz = border_size, psz = patch_size
float i_upper_limit = bsz + dis->h - 1.0f;
```
i.e. a patch may be placed up to `patch_size - 1` pixels outside of the image. `computeSSD()`/`computeSSDMeanNorm()` then read `patch_size` (+1 for bilinear interpolation) rows/columns starting at that clamped position, which stays inside the padded buffer only while `patch_size <= border_size`. `patch_size` is user-settable via `setPatchSize()` with no upper bound relative to the hardcoded `border_size` -- so `setPatchSize()` past 16, or a temporal-candidate flow large enough to push the clamped search against its limit, reads past the end of `I1s_ext` (confirmed via AddressSanitizer: heap-buffer-overflow in `computeSSDMeanNorm`).
### Fix
Size the border to whichever is larger, exactly once, at the top of `prepareBuffers()` (where every `I1s_ext[i]` already gets freshly created/padded on every `calc()` call, so this doesn't need any additional cache-invalidation logic):
```cpp
border_size = max(16, patch_size);
```
The needed inequality (`border_size >= patch_size`) is independent of image size, so this is sufficient at every pyramid level uniformly. `ocl_prepareBuffers()` does not need the equivalent change: `calc()`'s `CV_OCL_RUN` gate only takes the OpenCL path when `patch_size == 8` exactly, which is always within the hardcoded border, so that path can never reach this overflow.
### On the prior attempt
A prior attempt at this exact fix (#29600) was closed by @asmorkalov, who ran its own added regression test and got the same ASan heap-buffer-overflow again ("the patch is not efficient"). I want to be upfront about this rather than just re-submitting the same-looking diff: **I could not reproduce that failure.** I reproduced the original overflow on unfixed 5.x (same crash site / allocator stack as both the original issue report and #29600's own ASan trace), then applied the same one-line fix and ran #29600's own added test 20x plus a new 40-trial randomized stress test (`patch_size` 9-48 -- spanning above and below `border_size=16` -- varying image size, `patch_stride`, flow magnitude up to 120px, and a same-instance second `calc()` call to exercise buffer re-use across a patch-size change) under AddressSanitizer, with zero failures. I don't have a confirmed explanation for the discrepancy -- possibly a stale incremental build on the original attempt's end, since I hit and had to work around exactly that kind of false "no work to do" ninja build-cache issue myself while setting up this reproduction. Flagging this openly rather than asserting certainty either way -- happy to dig further if CI or review surfaces a case this doesn't cover.
### Testing
Verified locally with a dedicated ASan-instrumented Debug build (`-fsanitize=address`, separate from the Release build used to verify the rest of today's changes), specifically because an out-of-bounds read like this often just silently returns garbage in a Release build instead of crashing:
- Confirmed the crash reproduces on unfixed 5.x, and is gone with the fix, under both `regression_20185_patch_larger_than_border` (from #29600, included here) and a new `regression_20185_stress` test (40 randomized trials) -- both passing cleanly under ASan.
- Re-verified both tests pass in the standard Release configuration too.
- Full `opencv_test_video` suite (both ASan and Release): no failures attributable to this change; everything else failing needs `opencv_extra` test data (tracking/ECC/optical-flow reference videos/images) not configured in this scoped build.
### PR checklist
- [x] I agree to contribute to the project under Apache 2 License.
- [x] To the best of my knowledge, the proposed patch is not based on code under GPL or another incompatible license.
- [x] The PR is proposed to the proper branch (5.x).
- [x] Accuracy tests included (see above).
- [x] No public API/behavior change, so no documentation or sample updates needed.
Remove deprecated CommaInitializer API - #29948
This goes hand in hand with https://github.com/opencv/opencv_contrib/pull/4217
### Pull Request Readiness Checklist
See details at https://github.com/opencv/opencv/wiki/How_to_contribute#making-a-good-pull-request
- [x] I agree to contribute to the project under Apache 2 License.
- [x] To the best of my knowledge, the proposed patch is not based on a code under GPL or another license that is incompatible with OpenCV
- [x] The PR is proposed to the proper branch
- [x] There is a reference to the original bug report and related work
- [ ] There is accuracy test, performance test and test data in opencv_extra repository, if applicable
Patch to opencv_extra has the same branch name.
- [ ] The feature is well documented and sample code can be built with the project CMake
Add a CV_SIMD_SCALABLE path for the DIS patch processing kernels using
universal intrinsics and runtime vector lane counts.
Keep the existing CV_SIMD128 implementation unchanged to avoid affecting
fixed-width SIMD targets. The scalable path vectorizes patch rows with
v_float32 and handles remaining elements with the existing scalar code.
This enables native RVV vectorization for processPatch(),
processPatchMeanNorm(), computeSSD(), and computeSSDMeanNorm().
Co-authored-by: Yang Wang <yangwang@iscas.ac.cn>
Co-authored-by: Yuansheng <yuansheng@isrc.iscas.ac.cn>
Port of #29862 (merged into 4.x) to 5.x.
- Type/stride substitution only; arithmetic and evaluation order unchanged.
- RedBlackSOR: the v_extract<3>(prev, next) previous-lane construction is
replaced by an unaligned vx_load(p_next + j - 1); v_extract<3> is only
previous-lane when vlanes == 4, so this is required for wider lanes.
- HorPass keeps a strict bound, j < len - vlanes, while the other three use
j <= len - vlanes, since the vector body applies UPDATE to every lane and
the rightmost element must not receive UPDATE across the right border.
- No SVE claim: there is no SVE backend in-tree; scalable means RVV today.
video:rvv: optimize PyrLK tracker with RVV - #29947
### Summary
Add an RVV path to `LKTrackerInvoker` for patch interpolation and
covariance matrix accumulation.
### Implementation
Vectorize bilinear interpolation of image pixels and derivatives, and
accumulate A11, A12 and A22 using RVV widening operations. Reuse
temporary vectors and keep the main computation at `e16,m1` and
`e32/f32,m2` to limit vector register pressure.
### Functional Testing
```bash
./bin/opencv_test_video \
--gtest_filter='Video_OpticalFlowPyrLK.accuracy' \
--test_threads=1
./bin/opencv_test_video \
--gtest_filter='Video_OpticalFlowPyrLK.submat' \
--test_threads=1
```
Correctness was verified with:
- `Video_OpticalFlowPyrLK.accuracy`
- `Video_OpticalFlowPyrLK.submat`
### Performance Testing
```bash
OPENCV_FOR_THREADS_NUM=1 \
./bin/opencv_perf_video \
--gtest_filter='*OpticalFlowPyrLK_self*' \
--perf_threads=1
```
Performance was measured with `OpticalFlowPyrLK_self` using a single
thread on an RVV 1.0 system with VLEN=256.
All 96 benchmark cases improved with no regression. The sum of
per-case median execution times decreased from 409.89 ms to 332.33 ms,
a reduction of 18.9%. The best case decreased from 8.41 ms to 5.50 ms,
corresponding to a 34.6% reduction in execution time (1.53x speedup).
Median execution time (ms):
| Metric | Baseline | RVV | Time reduction |
|---|---:|---:|---:|
| Sum of per-case medians across all 96 cases | 409.89 | 332.33 | 18.9% |
| Best case | 8.41 | 5.50 | 34.6% |
### Co-authors
- Yang Wang <yangwang@iscas.ac.cn>
- Yuansheng <yuansheng@iscas.ac.cn>
### Pull Request Readiness Checklist
- [x] I agree to contribute to the project under Apache 2 License.
- [x] To the best of my knowledge, the proposed patch is not based on a code under GPL or another license that is incompatible with OpenCV
- [x] The PR is proposed to the proper branch
- [ ] There is a reference to the original bug report and related work
- [x] There is accuracy test, performance test and test data in opencv_extra repository, if applicable
Patch to opencv_extra has the same branch name.
- [ ] The feature is well documented and sample code can be built with the project CMake
Port of #29862 (merged into 4.x) to 5.x.
- Type/stride substitution only; arithmetic and evaluation order unchanged.
- RedBlackSOR: the v_extract<3>(prev, next) previous-lane construction is
replaced by an unaligned vx_load(p_next + j - 1); v_extract<3> is only
previous-lane when vlanes == 4, so this is required for wider lanes.
- HorPass keeps a strict bound, j < len - vlanes, while the other three use
j <= len - vlanes, since the vector body applies UPDATE to every lane and
the rightmost element must not receive UPDATE across the right border.
- No SVE claim: there is no SVE backend in-tree; scalable means RVV today.
video: accept CV_Bool masks in findTransformECC (#25895) #29681
### Problem
`cv::Mat_<bool>::depth()` returns `CV_Bool` in 5.0, where it returned `CV_8U` in 4.x.
`findTransformECCWithMask` does not type check `inputMask` at all. It passes it straight to `cv::threshold()` at `ecc.cpp:483`, and `cv::threshold()` dispatches only on `CV_8U`, `CV_16S`, `CV_16U`, `CV_32F` and `CV_64F`, erroring otherwise. So a boolean mask fails with an error pointing at imgproc rather than at the mask:
```
modules/imgproc/src/thresh.cpp:1607: error: (-210:Unsupported format or combination of formats)
in function 'cv::threshold'
```
### Fix
Widen a `CV_Bool` mask to `CV_8U` before the `threshold` call. The existing `THRESH_BINARY` step then treats any non-zero entry as selected, which matches the `CV_8U` mask semantics.
`inputMask` is used nowhere else in the function (only at `ecc.cpp:476` for the `empty()` check and at `:483`), so this is the single point that needed handling. `CV_8U` masks take an unchanged path.
Note that `cv::computeECC` already accepts a boolean mask, because it only forwards the mask to `countNonZero`, `meanStdDev` and `subtract`, which all handle `CV_Bool`. This change makes `findTransformECC` consistent with it.
### Test
`Video_ECC_BoolMask.matches_uchar_mask` builds a blurred checkerboard, warps it by a known translation, then runs `findTransformECC` with `MOTION_TRANSLATION` using a `Mat_<bool>` mask and the equivalent `CV_8UC1` mask, and requires the same warp matrix from both.
Verified locally on 5.x: the test fails without the change (with the error above) and passes with it. The full `*ECC*` set, 15 tests, passes with `OPENCV_TEST_DATA_PATH` set. No test data needed for the new test itself, it is synthetic.
Part of #25895, and follows the same approach as #29580, #29597 and #29622.
### Pull Request Readiness Checklist
- [x] I agree to contribute to the project under Apache 2 License.
- [x] To the best of my knowledge, the proposed patch is not based on a code under GPL or another license that is incompatible with OpenCV
- [x] The PR is proposed to the proper branch
- [x] There is a reference to the original bug report and related work
- [x] There is accuracy test, performance test and test data in opencv_extra repository, if applicable
Patch to opencv_extra has the same branch name.
- [x] The feature is well documented and sample code can be built with the project CMake
Replace "static inline" by "inline" in headers #29453
This fixes#29436
I also replaced CV_INLINE which can be removed in a later PR.
I can make a similar PR for 4.x if you want.
### Pull Request Readiness Checklist
See details at https://github.com/opencv/opencv/wiki/How_to_contribute#making-a-good-pull-request
- [x] I agree to contribute to the project under Apache 2 License.
- [x] To the best of my knowledge, the proposed patch is not based on a code under GPL or another license that is incompatible with OpenCV
- [x] The PR is proposed to the proper branch
- [x] There is a reference to the original bug report and related work
- [ ] There is accuracy test, performance test and test data in opencv_extra repository, if applicable
Patch to opencv_extra has the same branch name.
- [ ] The feature is well documented and sample code can be built with the project CMake
More use of AutoBuffer #28907
When possible, AutoBuffer should be faster than std::vector<>, and should not be worse if it requires a heap allocation rather than a stack allocation.
### Pull Request Readiness Checklist
See details at https://github.com/opencv/opencv/wiki/How_to_contribute#making-a-good-pull-request
- [x] I agree to contribute to the project under Apache 2 License.
- [x] To the best of my knowledge, the proposed patch is not based on a code under GPL or another license that is incompatible with OpenCV
- [X] The PR is proposed to the proper branch
- [ ] There is a reference to the original bug report and related work
- [X] There is accuracy test, performance test and test data in opencv_extra repository, if applicable
Patch to opencv_extra has the same branch name.
- [ ] The feature is well documented and sample code can be built with the project CMake
Inverted imgproc-geometry dependency and moved more functions to geometry #29230
Fixes: https://github.com/opencv/opencv/issues/20267
Continues: https://github.com/opencv/opencv/pull/29175
OpenCV Contrib: https://github.com/opencv/opencv_contrib/pull/4137
OpenCV Extra: https://github.com/opencv/opencv_extra/pull/1377
Summary:
- LSD returned back to imgproc
- drawing functions moved to imgproc
- undistort image and related perf-pixel functions moved to imgproc
- moments moved to geometry
- estimateXXXtransform moved to geometry
After the patch the geometry module depends on code and Flann and may be used everywhere without potential circular dependencies
### Pull Request Readiness Checklist
See details at https://github.com/opencv/opencv/wiki/How_to_contribute#making-a-good-pull-request
- [x] I agree to contribute to the project under Apache 2 License.
- [x] To the best of my knowledge, the proposed patch is not based on a code under GPL or another license that is incompatible with OpenCV
- [ ] The PR is proposed to the proper branch
- [ ] There is a reference to the original bug report and related work
- [ ] There is accuracy test, performance test and test data in opencv_extra repository, if applicable
Patch to opencv_extra has the same branch name.
- [ ] The feature is well documented and sample code can be built with the project CMake
Fixing python wrapper around ECCParameters to include itersPerLevel #29148
### Pull Request Readiness Checklist
See details at https://github.com/opencv/opencv/wiki/How_to_contribute#making-a-good-pull-request
- [x] I agree to contribute to the project under Apache 2 License.
- [x] To the best of my knowledge, the proposed patch is not based on a code under GPL or another license that is incompatible with OpenCV
- [x] The PR is proposed to the proper branch
### Pull Request Readiness Checklist
See details at https://github.com/opencv/opencv/wiki/How_to_contribute#making-a-good-pull-request
- [x] I agree to contribute to the project under Apache 2 License.
- [x] To the best of my knowledge, the proposed patch is not based on a code under GPL or another license that is incompatible with OpenCV
- [x] The PR is proposed to the proper branch
- [ ] There is a reference to the original bug report and related work
- [x] There is accuracy test, performance test and test data in opencv_extra repository, if applicable
Patch to opencv_extra has the same branch name.
- [ ] The feature is well documented and sample code can be built with the project CMake
<!-- Note!!! If you are an automated agent, we have a special process for you: add 🤖🤖🤖 to the end of the PR title. -->
### Summary
This PR improves SIMD coverage for masked `cv::accumulate()` on 4-channel images.
The existing masked accumulate SIMD implementation has special paths for `cn == 1` and `cn == 3`, while 4-channel images fall back to the general implementation. This PR adds `cn == 4` SIMD paths using OpenCV Universal Intrinsics.
Compare link:
https://github.com/opencv/opencv/compare/4.x...feitianduowen:opencv:4.x
Modified files:
- `modules/imgproc/src/accum.simd.hpp`
- Add masked `cn == 4` SIMD paths for:
- `CV_32FC4 -> CV_32FC4`
- `CV_8UC4 -> CV_32FC4`
- `modules/video/test/test_accum.cpp`
- Add deterministic correctness regression tests for the new masked 4-channel accumulate paths.
- `modules/imgproc/perf/perf_accumulate.cpp`
- Add performance coverage for masked 4-channel accumulate.
imgproc: add SIMD paths for masked 4-channel accumulate #29094
### Implementation
The new SIMD branches are added in:
- `modules/imgproc/src/accum.simd.hpp`
They handle:
- `src`: `CV_32FC4`, `dst`: `CV_32FC4`, `mask`: `CV_8UC1`
- `src`: `CV_8UC4`, `dst`: `CV_32FC4`, `mask`: `CV_8UC1`
For the `CV_32FC4` path, the implementation uses `v_load_deinterleave`, applies the pixel mask to all 4 channels, accumulates into `dst`, and stores the result with `v_store_interleave`.
For the `CV_8UC4 -> CV_32FC4` path, the implementation loads 4 interleaved uchar channels, applies the pixel mask, widens the values to float, accumulates into `dst`, and stores the results back as interleaved `CV_32FC4`.
The masked SIMD block is guarded with:
```cpp
if (x <= len - cVectorWidth)
{
...
}
```
This check ensures that SIMD setup and vector operations are only executed when at least one full vector iteration can run. For very small inputs or tail-only cases, the function skips SIMD initialization and lets the existing scalar fallback handle the data through `acc_general_(src, dst, mask, len, cn, x)`.
This keeps tail handling unchanged and avoids unnecessary SIMD initialization when the vector loop would be skipped.
### Accuracy tests
Added a deterministic regression test in:
* `modules/video/test/test_accum.cpp`
New test:
```bash
Video_Acc.accuracy_32FC4_masked_cn4
Video_Acc.accuracy_8UC4_to_32FC4_masked_cn4
```
Test commands:
```bash
opencv_test_video --gtest_filter=Video_Acc.accuracy_32FC4_masked_cn4
opencv_test_video --gtest_filter=Video_Acc.accuracy_8UC4_to_32FC4_masked_cn4
opencv_test_video --gtest_filter="Video_Acc.*:Video_AccSquared.*:Video_AccProduct.*:Video_RunningAvg.*"
```
The filtered accumulate-related tests passed locally.
I added dedicated deterministic tests instead of only extending the existing randomized accumulate tests because this PR only changes the masked `cv::accumulate()` paths for specific 4-channel type combinations. It does not add `cn == 4` SIMD coverage for `accumulateSquare`, `accumulateProduct`, or `accumulateWeighted`.
The existing base accumulate tests are shared by several accumulation functions. Extending the common randomized channel selection to include `cn == 4` would also affect tests for functions that are not optimized by this PR. The new deterministic tests directly cover the modified paths:
* `cv::accumulate(src, dst, mask)`
* `CV_32FC4 -> CV_32FC4`
* `CV_8UC4 -> CV_32FC4`
* `mask`: `CV_8UC1`
The test also covers small sizes and non-vector-multiple sizes, so both the new SIMD path and the existing scalar tail fallback are exercised.
### Performance tests
Added performance coverage in:
* `modules/imgproc/perf/perf_accumulate.cpp`
Perf command:
```bash
opencv_perf_imgproc --gtest_filter="*AccumulateMask32FC4*" --perf_min_samples=1000 --perf_force_samples=1000
opencv_perf_imgproc --gtest_filter="*AccumulateMask8UC4To32FC4*" --perf_min_samples=1000 --perf_force_samples=1000
```
Test environment:
* Release build
* AVX2 enabled
* IPP disabled
* OpenCL disabled
* Windows MinGW build
Performance results:
`CV_32FC4 -> CV_32FC4`
| Size | Before median | After median | Speedup |
| --------- | ------------- | ------------ | ------- |
| 1920x1080 | 3.07 ms | 2.74 ms | 1.12x |
| 1280x720 | 0.84 ms | 0.73 ms | 1.15x |
| 640x480 | 0.17 ms | 0.16 ms | 1.06x |
| 320x240 | 0.04 ms | 0.04 ms | ~1.00x |
`CV_8UC4 -> CV_32FC4`
| Size | Before median | After median | Speedup |
| --------- | ------------- | ------------ | ------- |
| 1920x1080 | 6.09 ms | 1.75 ms | 3.48x |
| 1280x720 | 2.69 ms | 0.82 ms | 3.28x |
| 640x480 | 0.96 ms | 0.28 ms | 3.43x |
| 320x240 | 0.24 ms | 0.06 ms | 4.00x |
| 127x61 | 0.02 ms | 0.01 ms | 2.00x |
### Build and test commands
The following commands were run from Windows `cmd.exe`.
```sh
cmake -S . -B build_release -G Ninja -DCMAKE_BUILD_TYPE=Release -DBUILD_TESTS=ON -DBUILD_PERF_TESTS=OFF -DBUILD_EXAMPLES=OFF -DWITH_IPP=OFF -DWITH_OPENCL=OFF -DCMAKE_C_FLAGS=-mstackrealign -DCMAKE_CXX_FLAGS=-mstackrealign
cmake --build build_release --target opencv_test_video -j 4
build_release\bin\opencv_test_video.exe --gtest_filter=Video_Acc.accuracy_32FC4_masked_cn4
build_release\bin\opencv_test_video.exe --gtest_filter=Video_Acc.accuracy_8UC4_to_32FC4_masked_cn4
build_release\bin\opencv_test_video.exe --gtest_filter=Video_Acc.*:Video_AccSquared.*:Video_AccProduct.*:Video_RunningAvg.*
```
Accuracy test commands passed locally.
For the performance comparison, I kept the new perf test in `modules/imgproc/perf/perf_accumulate.cpp` and only reverted `modules/imgproc/src/accum.simd.hpp` to measure the baseline. Then I restored the SIMD patch and measured the optimized version.
Baseline measurement:
```sh
git diff -- modules/imgproc/src/accum.simd.hpp > accum_cn4_simd.patch
git checkout -- modules/imgproc/src/accum.simd.hpp
mkdir perf_logs
cmake -S . -B build_perf_before -G Ninja -DCMAKE_BUILD_TYPE=Release -DBUILD_TESTS=OFF -DBUILD_PERF_TESTS=ON -DBUILD_EXAMPLES=OFF -DWITH_IPP=OFF -DWITH_OPENCL=OFF -DCMAKE_C_FLAGS=-mstackrealign -DCMAKE_CXX_FLAGS=-mstackrealign > perf_logs\before_cmake_config.txt 2>&1
cmake --build build_perf_before --target opencv_perf_imgproc -j 4 > perf_logs\before_build.txt 2>&1
build_perf_before\bin\opencv_perf_imgproc.exe --gtest_filter=*AccumulateMask32FC4* --perf_min_samples=1000 --perf_force_samples=1000 > perf_logs\before_perf.txt 2>&1
```
```sh
git diff -- modules/imgproc/src/accum.simd.hpp > accum_cn4_u8_simd.patch
git checkout -- modules/imgproc/src/accum.simd.hpp
cmake -S . -B build_perf_before_u8 -G Ninja -DCMAKE_BUILD_TYPE=Release -DBUILD_TESTS=OFF -DBUILD_PERF_TESTS=ON -DBUILD_EXAMPLES=OFF -DWITH_IPP=OFF -DWITH_OPENCL=OFF -DCMAKE_C_FLAGS=-mstackrealign -DCMAKE_CXX_FLAGS=-mstackrealign
cmake --build build_perf_before_u8 --target opencv_perf_imgproc -j 4
build_perf_before_u8\bin\opencv_perf_imgproc.exe --gtest_filter=*AccumulateMask8UC4To32FC4* --perf_min_samples=1000 --perf_force_samples=1000 > perf_logs\before_perf1.txt 2>&1
```
Optimized measurement:
```sh
git apply accum_cn4_simd.patch
cmake -S . -B build_perf_after -G Ninja -DCMAKE_BUILD_TYPE=Release -DBUILD_TESTS=OFF -DBUILD_PERF_TESTS=ON -DBUILD_EXAMPLES=OFF -DWITH_IPP=OFF -DWITH_OPENCL=OFF -DCMAKE_C_FLAGS=-mstackrealign -DCMAKE_CXX_FLAGS=-mstackrealign > perf_logs\after_cmake_config.txt 2>&1
cmake --build build_perf_after --target opencv_perf_imgproc -j 4 > perf_logs\after_build.txt 2>&1
build_perf_after\bin\opencv_perf_imgproc.exe --gtest_filter=*AccumulateMask32FC4* --perf_min_samples=500 --perf_force_samples=500 > perf_logs\after_perf.txt 2>&1
```
```sh
git apply accum_cn4_u8_simd.patch
cmake -S . -B build_perf_after_u8 -G Ninja -DCMAKE_BUILD_TYPE=Release -DBUILD_TESTS=OFF -DBUILD_PERF_TESTS=ON -DBUILD_EXAMPLES=OFF -DWITH_IPP=OFF -DWITH_OPENCL=OFF -DCMAKE_C_FLAGS=-mstackrealign -DCMAKE_CXX_FLAGS=-mstackrealign
cmake --build build_perf_after_u8 --target opencv_perf_imgproc -j 4
build_perf_after_u8\bin\opencv_perf_imgproc.exe --gtest_filter=*AccumulateMask8UC4To32FC4* --perf_min_samples=1000 --perf_force_samples=1000 > perf_logs\after_perf1.txt 2>&1
```
Performance comparison was measured by keeping the new perf tests and only reverting modules/imgproc/src/accum.simd.hpp for the baseline run.
`-mstackrealign` was used for the MinGW Windows build to avoid stack-alignment issues with AVX code generation during local testing.
### Notes
The implementation keeps the existing scalar fallback path unchanged. SIMD is used only for the newly covered masked `cn == 4` vectorizable part, and any remaining tail elements are still handled by `acc_general_()`.
The improvement is most visible on larger images. Small images are dominated by overhead and do not always show meaningful speedup.
Multiscale ECC #28802
OpenCV Extra: https://github.com/opencv/opencv_extra/pull/1338
### Pull Request Readiness Checklist
See details at https://github.com/opencv/opencv/wiki/How_to_contribute#making-a-good-pull-request
- [x] I agree to contribute to the project under Apache 2 License.
- [x] To the best of my knowledge, the proposed patch is not based on a code under GPL or another license that is incompatible with OpenCV
- [x] The PR is proposed to the proper branch
- [ ] There is a reference to the original bug report and related work
- [x] There is accuracy test, performance test and test data in opencv_extra repository, if applicable
Patch to opencv_extra has the same branch name.
- [x] The feature is well documented and sample code can be built with the project CMake
Added Output Tensor Names support in new DNN engine #28637
closes: https://github.com/opencv/opencv/issues/26201
### Pull Request Readiness Checklist
See details at https://github.com/opencv/opencv/wiki/How_to_contribute#making-a-good-pull-request
- [x] I agree to contribute to the project under Apache 2 License.
- [x] To the best of my knowledge, the proposed patch is not based on a code under GPL or another license that is incompatible with OpenCV
- [x] The PR is proposed to the proper branch
- [x] There is a reference to the original bug report and related work
- [x] There is accuracy test, performance test and test data in opencv_extra repository, if applicable
Patch to opencv_extra has the same branch name.
- [x] The feature is well documented and sample code can be built with the project CMake
video: Optimized ScharrDeriv#28632
- Move to CV_SIMD_SCALABLE
- avx2 & avx512 dispatch added for ScharrDeriv
### Pull Request Readiness Checklist
See details at https://github.com/opencv/opencv/wiki/How_to_contribute#making-a-good-pull-request
- [x] I agree to contribute to the project under Apache 2 License.
- [x] To the best of my knowledge, the proposed patch is not based on a code under GPL or another license that is incompatible with OpenCV
- [x] The PR is proposed to the proper branch
- [ ] There is a reference to the original bug report and related work
- [x] There is accuracy test, performance test and test data in opencv_extra repository, if applicable
Patch to opencv_extra has the same branch name.
- [x] The feature is well documented and sample code can be built with the project CMake
[video] Add setCoarsestScale to DISOpticalFlow (Fixes#25068) #28217
### Description
This PR addresses issue #25068 regarding the number of scales in `DISOpticalFlow`.
Currently, `DISOpticalFlow` automatically computes the `coarsest_scale` based on the image size. While generally effective, this behavior can cause errors in specific use cases (e.g., mechanics/speckle pattern analysis) where high pyramid levels degrade quality.
This change introduces a manual override:
- Added `setCoarsestScale(int val)` and `getCoarsestScale()` to the public API.
- Updated `DISOpticalFlowImpl::calc` and `ocl_calc` to use the user-defined scale if set.
- Preserved the existing "automatic" behavior as the default (when set to -1).
### Changes
- **`modules/video/include/opencv2/video/tracking.hpp`**: Added virtual method declarations.
- **`modules/video/src/dis_flow.cpp`**: Implemented `set/getCoarsestScale` in `DISOpticalFlowImpl` and updated calculation logic.
- **`modules/video/test/test_OF_accuracy.cpp`**: Added `DenseOpticalFlow_DIS.ManualCoarsestScale` regression test.
Fixes#25068
Enable KleidiCV on Linux and Mac Mx by default #27640
OpenCV Extra: https://github.com/opencv/opencv_extra/pull/1296
### Pull Request Readiness Checklist
See details at https://github.com/opencv/opencv/wiki/How_to_contribute#making-a-good-pull-request
- [x] I agree to contribute to the project under Apache 2 License.
- [x] To the best of my knowledge, the proposed patch is not based on a code under GPL or another license that is incompatible with OpenCV
- [ ] The PR is proposed to the proper branch
- [ ] There is a reference to the original bug report and related work
- [ ] There is accuracy test, performance test and test data in opencv_extra repository, if applicable
Patch to opencv_extra has the same branch name.
- [ ] The feature is well documented and sample code can be built with the project CMake
Add optional template mask for findTransformECC #27952
Supersedes #22997
**Summary**
Add optional template mask support to findTransformECC so that only pixels valid in both the template and the image are used in ECC. Backward compatibility is preserved (existing signatures unchanged; one new overload adds templateMask).
**Motivation**
- Real-world frames often contain moving foreground artifacts (e.g., a football over a static field). Masking the object in one frame only is insufficient because its position changes independently of the background. Since we don’t know the warp a priori, we can’t back-project a single mask across frames. The correct approach is to supply both masks and take their intersection.
- Templates may include uninformative/low-texture or noisy regions, or partial overlaps with other objects. Excluding such regions from the alignment improves robustness and convergence.
This PR completes and replaces https://github.com/opencv/opencv/pull/22997
### Pull Request Readiness Checklist
See details at https://github.com/opencv/opencv/wiki/How_to_contribute#making-a-good-pull-request
- [x] I agree to contribute to the project under Apache 2 License.
- [x] To the best of my knowledge, the proposed patch is not based on a code under GPL or another license that is incompatible with OpenCV
- [ ] The PR is proposed to the proper branch
- [ ] There is a reference to the original bug report and related work
- [ ] There is accuracy test, performance test and test data in opencv_extra repository, if applicable
Patch to opencv_extra has the same branch name.
- [ ] The feature is well documented and sample code can be built with the project CMake
2025-10-14T05:53:31.5387050Z C:\GHA-OCV-1\_work\ci-gha-workflow\ci-gha-workflow\opencv\modules\imgcodecs\src\bitstrm.cpp(156,57): warning C4244: 'argument': conversion from 'int64_t' to 'ptrdiff_t', possible loss of data [C:\GHA-OCV-1\_work\ci-gha-workflow\ci-gha-workflow\build\modules\imgcodecs\opencv_imgcodecs.vcxproj]
### Pull Request Readiness Checklist
Optional Known Foreground Mask for Background Subtractors #27810
See details at https://github.com/opencv/opencv/wiki/How_to_contribute#making-a-good-pull-request
- [x] I agree to contribute to the project under Apache 2 License.
- [x] To the best of my knowledge, the proposed patch is not based on a code under GPL or another license that is incompatible with OpenCV
- [x] The PR is proposed to the proper branch
- [x] There is a reference to the original bug report and related work
- [x] There is accuracy test, performance test and test data in opencv_extra repository, if applicable
Patch to opencv_extra has the same branch name.
- [x] The feature is well documented and sample code can be built with the project CMake
### Description
This adds an optional foreground input mask parameter to the MOG2 and KNN background subtractors, in line with issue https://github.com/opencv/opencv/issues/26476
4 tests are added under test_bgfg2.cpp:
2 for each subtractor type (1 with shadow detection and 1 without)
A demo shows the feature with only 3 parameters and with a 4th optional foreground mask for both core subtractor types.
Note: To patch contrib inheritance of the background subtraction class, empty apply method which throws a not implemented error is added to contrib subclasses. This is done to keep the overloaded apply function as pure virtual. Contrib PR to be made and linked shortly.
Contrib Repo Paired Pull Request: https://github.com/opencv/opencv_contrib/pull/4017
Added trackers factory with pre-loaded dnn models #26875
Replaces https://github.com/opencv/opencv/pull/26295
Allows to substitute custom models or initialize tracker from in-memory model.
### Pull Request Readiness Checklist
See details at https://github.com/opencv/opencv/wiki/How_to_contribute#making-a-good-pull-request
- [x] I agree to contribute to the project under Apache 2 License.
- [x] To the best of my knowledge, the proposed patch is not based on a code under GPL or another license that is incompatible with OpenCV
- [ ] The PR is proposed to the proper branch
- [ ] There is a reference to the original bug report and related work
- [ ] There is accuracy test, performance test and test data in opencv_extra repository, if applicable
Patch to opencv_extra has the same branch name.
- [ ] The feature is well documented and sample code can be built with the project CMake
Improved Tracker Samples #26202
Relates to #25006
This sample has been rewritten to track a selected target in a video or camera stream. It combines VIT tracker, Nano tracker and Dasiamrpn tracker into one tracker sample
### Pull Request Readiness Checklist
See details at https://github.com/opencv/opencv/wiki/How_to_contribute#making-a-good-pull-request
- [x] I agree to contribute to the project under Apache 2 License.
- [x] To the best of my knowledge, the proposed patch is not based on a code under GPL or another license that is incompatible with OpenCV
- [x] The PR is proposed to the proper branch
- [x] There is a reference to the original bug report and related work
- [x] There is accuracy test, performance test and test data in opencv_extra repository, if applicable
Patch to opencv_extra has the same branch name.
- [x] The feature is well documented and sample code can be built with the project CMake
CodeCraftsman
Alexander Smorkalov
Vincent Rabaud
Jeongkeun Kim
Alexander Smorkalov
Neal Daftary
Abhishek Gola
Teddy-Yangjiale
Pierre Chatelier
4ekmah
Siyu Wang
Madan mohan Manokar
raimbekovm
satyam yadav
Dmytro Dadyka
Dave Merchant
Gursimar Singh
Maksim Shabunin