Initial commit
This commit is contained in:
887
Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_comp.h
Normal file
887
Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_comp.h
Normal file
@@ -0,0 +1,887 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32l4xx_ll_comp.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of COMP LL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32L4xx_LL_COMP_H
|
||||
#define STM32L4xx_LL_COMP_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32l4xx.h"
|
||||
|
||||
/** @addtogroup STM32L4xx_LL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined (COMP1) || defined (COMP2)
|
||||
|
||||
/** @defgroup COMP_LL COMP
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup COMP_LL_Private_Constants COMP Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* COMP registers bits positions */
|
||||
#define LL_COMP_OUTPUT_LEVEL_BITOFFSET_POS (30UL) /* Value equivalent to POSITION_VAL(COMP_CSR_VALUE) */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup COMP_LL_Private_Macros COMP Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
#if defined(USE_FULL_LL_DRIVER)
|
||||
/** @defgroup COMP_LL_ES_INIT COMP Exported Init structure
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Structure definition of some features of COMP instance.
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t PowerMode; /*!< Set comparator operating mode to adjust power and speed.
|
||||
This parameter can be a value of @ref COMP_LL_EC_POWERMODE
|
||||
|
||||
This feature can be modified afterwards using unitary function @ref LL_COMP_SetPowerMode(). */
|
||||
|
||||
uint32_t InputPlus; /*!< Set comparator input plus (non-inverting input).
|
||||
This parameter can be a value of @ref COMP_LL_EC_INPUT_PLUS
|
||||
|
||||
This feature can be modified afterwards using unitary function @ref LL_COMP_SetInputPlus(). */
|
||||
|
||||
uint32_t InputMinus; /*!< Set comparator input minus (inverting input).
|
||||
This parameter can be a value of @ref COMP_LL_EC_INPUT_MINUS
|
||||
|
||||
This feature can be modified afterwards using unitary function @ref LL_COMP_SetInputMinus(). */
|
||||
|
||||
uint32_t InputHysteresis; /*!< Set comparator hysteresis mode of the input minus.
|
||||
This parameter can be a value of @ref COMP_LL_EC_INPUT_HYSTERESIS
|
||||
|
||||
This feature can be modified afterwards using unitary function @ref LL_COMP_SetInputHysteresis(). */
|
||||
|
||||
uint32_t OutputPolarity; /*!< Set comparator output polarity.
|
||||
This parameter can be a value of @ref COMP_LL_EC_OUTPUT_POLARITY
|
||||
|
||||
This feature can be modified afterwards using unitary function @ref LL_COMP_SetOutputPolarity(). */
|
||||
|
||||
uint32_t OutputBlankingSource; /*!< Set comparator blanking source.
|
||||
This parameter can be a value of @ref COMP_LL_EC_OUTPUT_BLANKING_SOURCE
|
||||
|
||||
This feature can be modified afterwards using unitary function @ref LL_COMP_SetOutputBlankingSource(). */
|
||||
|
||||
} LL_COMP_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* USE_FULL_LL_DRIVER */
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup COMP_LL_Exported_Constants COMP Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup COMP_LL_EC_COMMON_WINDOWMODE Comparator common modes - Window mode
|
||||
* @{
|
||||
*/
|
||||
#if defined(COMP2)
|
||||
#define LL_COMP_WINDOWMODE_DISABLE (0x00000000UL) /*!< Window mode disable: Comparators 1 and 2 are independent */
|
||||
#define LL_COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON (COMP_CSR_WINMODE) /*!< Window mode enable: Comparators instances pair COMP1 and COMP2 have their input plus connected together. The common input is COMP1 input plus (COMP2 input plus is no more accessible). */
|
||||
#endif /* COMP2 */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup COMP_LL_EC_POWERMODE Comparator modes - Power mode
|
||||
* @{
|
||||
*/
|
||||
#define LL_COMP_POWERMODE_HIGHSPEED (0x00000000UL) /*!< COMP power mode to high speed */
|
||||
#define LL_COMP_POWERMODE_MEDIUMSPEED (COMP_CSR_PWRMODE_0) /*!< COMP power mode to medium speed */
|
||||
#define LL_COMP_POWERMODE_ULTRALOWPOWER (COMP_CSR_PWRMODE_1 | COMP_CSR_PWRMODE_0) /*!< COMP power mode to ultra-low power */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup COMP_LL_EC_INPUT_PLUS Comparator inputs - Input plus (input non-inverting) selection
|
||||
* @{
|
||||
*/
|
||||
#define LL_COMP_INPUT_PLUS_IO1 (0x00000000UL) /*!< Comparator input plus connected to IO1 (pin PC5 for COMP1, pin PB4 for COMP2) */
|
||||
#define LL_COMP_INPUT_PLUS_IO2 (COMP_CSR_INPSEL_0) /*!< Comparator input plus connected to IO2 (pin PB2 for COMP1, pin PB6 for COMP2) */
|
||||
#if defined(COMP_CSR_INPSEL_1)
|
||||
#define LL_COMP_INPUT_PLUS_IO3 (COMP_CSR_INPSEL_1) /*!< Comparator input plus connected to IO3 (pin PA1 for COMP1, pin PA3 for COMP2) */
|
||||
#endif /* COMP_CSR_INPSEL_1 */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup COMP_LL_EC_INPUT_MINUS Comparator inputs - Input minus (input inverting) selection
|
||||
* @{
|
||||
*/
|
||||
#define LL_COMP_INPUT_MINUS_1_4VREFINT ( COMP_CSR_SCALEN | COMP_CSR_BRGEN) /*!< Comparator input minus connected to 1/4 VrefInt */
|
||||
#define LL_COMP_INPUT_MINUS_1_2VREFINT ( COMP_CSR_INMSEL_0 | COMP_CSR_SCALEN | COMP_CSR_BRGEN) /*!< Comparator input minus connected to 1/2 VrefInt */
|
||||
#define LL_COMP_INPUT_MINUS_3_4VREFINT ( COMP_CSR_INMSEL_1 | COMP_CSR_SCALEN | COMP_CSR_BRGEN) /*!< Comparator input minus connected to 3/4 VrefInt */
|
||||
#define LL_COMP_INPUT_MINUS_VREFINT ( COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0 | COMP_CSR_SCALEN ) /*!< Comparator input minus connected to VrefInt */
|
||||
#define LL_COMP_INPUT_MINUS_DAC1_CH1 (COMP_CSR_INMSEL_2 ) /*!< Comparator input minus connected to DAC1 channel 1 (DAC_OUT1) */
|
||||
#define LL_COMP_INPUT_MINUS_DAC1_CH2 (COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to DAC1 channel 2 (DAC_OUT2) */
|
||||
#define LL_COMP_INPUT_MINUS_IO1 (COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 ) /*!< Comparator input minus connected to IO1 (pin PB1 for COMP1, pin PB3 for COMP2) */
|
||||
#define LL_COMP_INPUT_MINUS_IO2 (COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to IO2 (pin PC4 for COMP1, pin PB7 for COMP2) */
|
||||
#if defined(COMP_CSR_INMESEL_1)
|
||||
#define LL_COMP_INPUT_MINUS_IO3 ( COMP_CSR_INMESEL_0 | COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to IO3 (pin PA0 for COMP1, pin PA2 for COMP2) */
|
||||
#define LL_COMP_INPUT_MINUS_IO4 (COMP_CSR_INMESEL_1 | COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to IO4 (pin PA4 for COMP1, pin PA4 for COMP2) */
|
||||
#define LL_COMP_INPUT_MINUS_IO5 (COMP_CSR_INMESEL_1 | COMP_CSR_INMESEL_0 | COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to IO5 (pin PA5 for COMP1, pin PA5 for COMP2) */
|
||||
#endif
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup COMP_LL_EC_INPUT_LEGACY Comparator inputs legacy literals name
|
||||
* @{
|
||||
*/
|
||||
#define LL_COMP_WINDOWMODE_ENABLE LL_COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON
|
||||
|
||||
#define LL_COMP_INVERTINGINPUT_1_4VREFINT LL_COMP_INPUT_MINUS_1_4VREFINT
|
||||
#define LL_COMP_INVERTINGINPUT_1_2VREFINT LL_COMP_INPUT_MINUS_1_2VREFINT
|
||||
#define LL_COMP_INVERTINGINPUT_3_4VREFINT LL_COMP_INPUT_MINUS_3_4VREFINT
|
||||
#define LL_COMP_INVERTINGINPUT_VREFINT LL_COMP_INPUT_MINUS_VREFINT
|
||||
#define LL_COMP_INVERTINGINPUT_DAC1 LL_COMP_INPUT_MINUS_DAC1_CH1
|
||||
#define LL_COMP_INVERTINGINPUT_DAC2 LL_COMP_INPUT_MINUS_DAC1_CH2
|
||||
#define LL_COMP_INVERTINGINPUT_IO1 LL_COMP_INPUT_MINUS_IO1
|
||||
#define LL_COMP_INVERTINGINPUT_IO2 LL_COMP_INPUT_MINUS_IO2
|
||||
#if defined(COMP_CSR_INMESEL_1)
|
||||
#define LL_COMP_INVERTINGINPUT_IO3 LL_COMP_INPUT_MINUS_IO3
|
||||
#define LL_COMP_INVERTINGINPUT_IO4 LL_COMP_INPUT_MINUS_IO4
|
||||
#define LL_COMP_INVERTINGINPUT_IO5 LL_COMP_INPUT_MINUS_IO5
|
||||
#endif /* COMP_CSR_INMESEL_1 */
|
||||
|
||||
#define LL_COMP_NONINVERTINGINPUT_IO1 LL_COMP_INPUT_PLUS_IO1
|
||||
#define LL_COMP_NONINVERTINGINPUT_IO2 LL_COMP_INPUT_PLUS_IO2
|
||||
#if defined(COMP_CSR_INPSEL_1)
|
||||
#define LL_COMP_NONINVERTINGINPUT_IO3 LL_COMP_INPUT_PLUS_IO3
|
||||
#endif /* COMP_CSR_INPSEL_1 */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup COMP_LL_EC_INPUT_HYSTERESIS Comparator input - Hysteresis
|
||||
* @{
|
||||
*/
|
||||
#define LL_COMP_HYSTERESIS_NONE (0x00000000UL) /*!< No hysteresis */
|
||||
#define LL_COMP_HYSTERESIS_LOW ( COMP_CSR_HYST_0) /*!< Hysteresis level low */
|
||||
#define LL_COMP_HYSTERESIS_MEDIUM (COMP_CSR_HYST_1 ) /*!< Hysteresis level medium */
|
||||
#define LL_COMP_HYSTERESIS_HIGH (COMP_CSR_HYST_1 | COMP_CSR_HYST_0) /*!< Hysteresis level high */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup COMP_LL_EC_OUTPUT_POLARITY Comparator output - Output polarity
|
||||
* @{
|
||||
*/
|
||||
#define LL_COMP_OUTPUTPOL_NONINVERTED (0x00000000UL) /*!< COMP output polarity is not inverted: comparator output is high when the plus (non-inverting) input is at a higher voltage than the minus (inverting) input */
|
||||
#define LL_COMP_OUTPUTPOL_INVERTED (COMP_CSR_POLARITY) /*!< COMP output polarity is inverted: comparator output is low when the plus (non-inverting) input is at a lower voltage than the minus (inverting) input */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup COMP_LL_EC_OUTPUT_BLANKING_SOURCE Comparator output - Blanking source
|
||||
* @{
|
||||
*/
|
||||
#define LL_COMP_BLANKINGSRC_NONE (0x00000000UL) /*!<Comparator output without blanking */
|
||||
#define LL_COMP_BLANKINGSRC_TIM1_OC5_COMP1 (COMP_CSR_BLANKING_0) /*!< Comparator output blanking source TIM1 OC5 (specific to COMP instance: COMP1) */
|
||||
#define LL_COMP_BLANKINGSRC_TIM2_OC3_COMP1 (COMP_CSR_BLANKING_1) /*!< Comparator output blanking source TIM2 OC3 (specific to COMP instance: COMP1) */
|
||||
#define LL_COMP_BLANKINGSRC_TIM3_OC3_COMP1 (COMP_CSR_BLANKING_2) /*!< Comparator output blanking source TIM3 OC3 (specific to COMP instance: COMP1) */
|
||||
#define LL_COMP_BLANKINGSRC_TIM3_OC4_COMP2 (COMP_CSR_BLANKING_0) /*!< Comparator output blanking source TIM3 OC4 (specific to COMP instance: COMP2) */
|
||||
#define LL_COMP_BLANKINGSRC_TIM8_OC5_COMP2 (COMP_CSR_BLANKING_1) /*!< Comparator output blanking source TIM8 OC5 (specific to COMP instance: COMP2) */
|
||||
#define LL_COMP_BLANKINGSRC_TIM15_OC1_COMP2 (COMP_CSR_BLANKING_2) /*!< Comparator output blanking source TIM15 OC1 (specific to COMP instance: COMP2) */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup COMP_LL_EC_OUTPUT_BLANKING_SOURCE_LEGACY Comparator output blanking source legacy literals name
|
||||
* @{
|
||||
*/
|
||||
#define LL_COMP_BLANKINGSRC_TIM1_OC5 (LL_COMP_BLANKINGSRC_TIM1_OC5_COMP1)
|
||||
#define LL_COMP_BLANKINGSRC_TIM2_OC3 (LL_COMP_BLANKINGSRC_TIM2_OC3_COMP1)
|
||||
#define LL_COMP_BLANKINGSRC_TIM3_OC3 (LL_COMP_BLANKINGSRC_TIM3_OC3_COMP1)
|
||||
|
||||
#define LL_COMP_BLANKINGSRC_TIM3_OC4 (LL_COMP_BLANKINGSRC_TIM3_OC4_COMP2)
|
||||
#define LL_COMP_BLANKINGSRC_TIM8_OC5 (LL_COMP_BLANKINGSRC_TIM8_OC5_COMP2)
|
||||
#define LL_COMP_BLANKINGSRC_TIM15_OC1 (LL_COMP_BLANKINGSRC_TIM15_OC1_COMP2)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup COMP_LL_EC_OUTPUT_LEVEL Comparator output - Output level
|
||||
* @{
|
||||
*/
|
||||
#define LL_COMP_OUTPUT_LEVEL_LOW (0x00000000UL) /*!< Comparator output level low (if the polarity is not inverted, otherwise to be complemented) */
|
||||
#define LL_COMP_OUTPUT_LEVEL_HIGH (0x00000001UL) /*!< Comparator output level high (if the polarity is not inverted, otherwise to be complemented) */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup COMP_LL_EC_HW_DELAYS Definitions of COMP hardware constraints delays
|
||||
* @note Only COMP peripheral HW delays are defined in COMP LL driver driver,
|
||||
* not timeout values.
|
||||
* For details on delays values, refer to descriptions in source code
|
||||
* above each literal definition.
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Delay for comparator startup time. */
|
||||
/* Note: Delay required to reach propagation delay specification. */
|
||||
/* Literal set to maximum value (refer to device datasheet, */
|
||||
/* parameter "tSTART"). */
|
||||
/* Unit: us */
|
||||
#define LL_COMP_DELAY_STARTUP_US ( 80UL) /*!< Delay for COMP startup time */
|
||||
|
||||
/* Delay for comparator voltage scaler stabilization time. */
|
||||
/* Note: Voltage scaler is used when selecting comparator input */
|
||||
/* based on VrefInt: VrefInt or subdivision of VrefInt. */
|
||||
/* Literal set to maximum value (refer to device datasheet, */
|
||||
/* parameter "tSTART_SCALER"). */
|
||||
/* Unit: us */
|
||||
#define LL_COMP_DELAY_VOLTAGE_SCALER_STAB_US ( 200UL) /*!< Delay for COMP voltage scaler stabilization time */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup COMP_LL_Exported_Macros COMP Exported Macros
|
||||
* @{
|
||||
*/
|
||||
/** @defgroup COMP_LL_EM_WRITE_READ Common write and read registers macro
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Write a value in COMP register
|
||||
* @param __INSTANCE__ comparator instance
|
||||
* @param __REG__ Register to be written
|
||||
* @param __VALUE__ Value to be written in the register
|
||||
* @retval None
|
||||
*/
|
||||
#define LL_COMP_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG((__INSTANCE__)->__REG__, (__VALUE__))
|
||||
|
||||
/**
|
||||
* @brief Read a value in COMP register
|
||||
* @param __INSTANCE__ comparator instance
|
||||
* @param __REG__ Register to be read
|
||||
* @retval Register value
|
||||
*/
|
||||
#define LL_COMP_ReadReg(__INSTANCE__, __REG__) READ_REG((__INSTANCE__)->__REG__)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup COMP_LL_EM_HELPER_MACRO COMP helper macro
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Helper macro to select the COMP common instance
|
||||
* to which is belonging the selected COMP instance.
|
||||
* @note COMP common register instance can be used to
|
||||
* set parameters common to several COMP instances.
|
||||
* Refer to functions having argument "COMPxy_COMMON" as parameter.
|
||||
* @param __COMPx__ COMP instance
|
||||
* @retval COMP common instance or value "0" if there is no COMP common instance.
|
||||
*/
|
||||
#define __LL_COMP_COMMON_INSTANCE(__COMPx__) \
|
||||
(COMP12_COMMON)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup COMP_LL_Exported_Functions COMP Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined(COMP2)
|
||||
/** @defgroup COMP_LL_EF_Configuration_comparator_common Configuration of COMP hierarchical scope: common to several COMP instances
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Set window mode of a pair of comparators instances
|
||||
* (2 consecutive COMP instances COMP<x> and COMP<x+1>).
|
||||
* @rmtoll CSR WINMODE LL_COMP_SetCommonWindowMode
|
||||
* @param COMPxy_COMMON Comparator common instance
|
||||
* (can be set directly from CMSIS definition or by using helper macro @ref __LL_COMP_COMMON_INSTANCE() )
|
||||
* @param WindowMode This parameter can be one of the following values:
|
||||
* @arg @ref LL_COMP_WINDOWMODE_DISABLE
|
||||
* @arg @ref LL_COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_COMP_SetCommonWindowMode(COMP_Common_TypeDef *COMPxy_COMMON, uint32_t WindowMode)
|
||||
{
|
||||
/* Note: On this STM32 series, window mode can be set only */
|
||||
/* from COMP instance: COMP2. */
|
||||
MODIFY_REG(COMPxy_COMMON->CSR, COMP_CSR_WINMODE, WindowMode);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get window mode of a pair of comparators instances
|
||||
* (2 consecutive COMP instances COMP<x> and COMP<x+1>).
|
||||
* @rmtoll CSR WINMODE LL_COMP_GetCommonWindowMode
|
||||
* @param COMPxy_COMMON Comparator common instance
|
||||
* (can be set directly from CMSIS definition or by using helper macro @ref __LL_COMP_COMMON_INSTANCE() )
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_COMP_WINDOWMODE_DISABLE
|
||||
* @arg @ref LL_COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_COMP_GetCommonWindowMode(COMP_Common_TypeDef *COMPxy_COMMON)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(COMPxy_COMMON->CSR, COMP_CSR_WINMODE));
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* COMP2 */
|
||||
/** @defgroup COMP_LL_EF_Configuration_comparator_modes Configuration of comparator modes
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Set comparator instance operating mode to adjust power and speed.
|
||||
* @rmtoll CSR PWRMODE LL_COMP_SetPowerMode
|
||||
* @param COMPx Comparator instance
|
||||
* @param PowerMode This parameter can be one of the following values:
|
||||
* @arg @ref LL_COMP_POWERMODE_HIGHSPEED
|
||||
* @arg @ref LL_COMP_POWERMODE_MEDIUMSPEED
|
||||
* @arg @ref LL_COMP_POWERMODE_ULTRALOWPOWER
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_COMP_SetPowerMode(COMP_TypeDef *COMPx, uint32_t PowerMode)
|
||||
{
|
||||
MODIFY_REG(COMPx->CSR, COMP_CSR_PWRMODE, PowerMode);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get comparator instance operating mode to adjust power and speed.
|
||||
* @rmtoll CSR PWRMODE LL_COMP_GetPowerMode
|
||||
* @param COMPx Comparator instance
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_COMP_POWERMODE_HIGHSPEED
|
||||
* @arg @ref LL_COMP_POWERMODE_MEDIUMSPEED
|
||||
* @arg @ref LL_COMP_POWERMODE_ULTRALOWPOWER
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_COMP_GetPowerMode(COMP_TypeDef *COMPx)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_PWRMODE));
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup COMP_LL_EF_Configuration_comparator_inputs Configuration of comparator inputs
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Set comparator inputs minus (inverting) and plus (non-inverting).
|
||||
* @note In case of comparator input selected to be connected to IO:
|
||||
* GPIO pins are specific to each comparator instance.
|
||||
* Refer to description of parameters or to reference manual.
|
||||
* @note On this STM32 series, scaler bridge is configurable:
|
||||
* to optimize power consumption, this function enables the
|
||||
* voltage scaler bridge only when required
|
||||
* (when selecting comparator input based on VrefInt: VrefInt or
|
||||
* subdivision of VrefInt).
|
||||
* - For scaler bridge power consumption values,
|
||||
* refer to device datasheet, parameter "IDDA(SCALER)".
|
||||
* - Voltage scaler requires a delay for voltage stabilization.
|
||||
* Refer to device datasheet, parameter "tSTART_SCALER".
|
||||
* - Scaler bridge is common for all comparator instances,
|
||||
* therefore if at least one of the comparator instance
|
||||
* is requiring the scaler bridge, it remains enabled.
|
||||
* @rmtoll CSR INMSEL LL_COMP_ConfigInputs\n
|
||||
* CSR INPSEL LL_COMP_ConfigInputs\n
|
||||
* CSR BRGEN LL_COMP_ConfigInputs\n
|
||||
* CSR SCALEN LL_COMP_ConfigInputs
|
||||
* @param COMPx Comparator instance
|
||||
* @param InputMinus This parameter can be one of the following values:
|
||||
* @arg @ref LL_COMP_INPUT_MINUS_1_4VREFINT
|
||||
* @arg @ref LL_COMP_INPUT_MINUS_1_2VREFINT
|
||||
* @arg @ref LL_COMP_INPUT_MINUS_3_4VREFINT
|
||||
* @arg @ref LL_COMP_INPUT_MINUS_VREFINT
|
||||
* @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH1
|
||||
* @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH2 (*)
|
||||
* @arg @ref LL_COMP_INPUT_MINUS_IO1
|
||||
* @arg @ref LL_COMP_INPUT_MINUS_IO2
|
||||
* @arg @ref LL_COMP_INPUT_MINUS_IO3 (*)
|
||||
* @arg @ref LL_COMP_INPUT_MINUS_IO4 (*)
|
||||
* @arg @ref LL_COMP_INPUT_MINUS_IO5 (*)
|
||||
*
|
||||
* (*) Parameter not available on all devices.
|
||||
* @param InputPlus This parameter can be one of the following values:
|
||||
* @arg @ref LL_COMP_INPUT_PLUS_IO1
|
||||
* @arg @ref LL_COMP_INPUT_PLUS_IO2
|
||||
* @arg @ref LL_COMP_INPUT_PLUS_IO3 (*)
|
||||
*
|
||||
* (*) Parameter not available on all devices.
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_COMP_ConfigInputs(COMP_TypeDef *COMPx, uint32_t InputMinus, uint32_t InputPlus)
|
||||
{
|
||||
#if defined(COMP_CSR_INMESEL_1)
|
||||
MODIFY_REG(COMPx->CSR,
|
||||
COMP_CSR_INMESEL | COMP_CSR_INMSEL | COMP_CSR_INPSEL | COMP_CSR_SCALEN | COMP_CSR_BRGEN,
|
||||
InputMinus | InputPlus);
|
||||
#else
|
||||
MODIFY_REG(COMPx->CSR,
|
||||
COMP_CSR_INMSEL | COMP_CSR_INPSEL | COMP_CSR_SCALEN | COMP_CSR_BRGEN,
|
||||
InputMinus | InputPlus);
|
||||
#endif
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set comparator input plus (non-inverting).
|
||||
* @note In case of comparator input selected to be connected to IO:
|
||||
* GPIO pins are specific to each comparator instance.
|
||||
* Refer to description of parameters or to reference manual.
|
||||
* @rmtoll CSR INPSEL LL_COMP_SetInputPlus
|
||||
* @param COMPx Comparator instance
|
||||
* @param InputPlus This parameter can be one of the following values:
|
||||
* @arg @ref LL_COMP_INPUT_PLUS_IO1
|
||||
* @arg @ref LL_COMP_INPUT_PLUS_IO2
|
||||
* @arg @ref LL_COMP_INPUT_PLUS_IO3 (*)
|
||||
*
|
||||
* (*) Parameter not available on all devices.
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_COMP_SetInputPlus(COMP_TypeDef *COMPx, uint32_t InputPlus)
|
||||
{
|
||||
MODIFY_REG(COMPx->CSR, COMP_CSR_INPSEL, InputPlus);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get comparator input plus (non-inverting).
|
||||
* @note In case of comparator input selected to be connected to IO:
|
||||
* GPIO pins are specific to each comparator instance.
|
||||
* Refer to description of parameters or to reference manual.
|
||||
* @rmtoll CSR INPSEL LL_COMP_GetInputPlus
|
||||
* @param COMPx Comparator instance
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_COMP_INPUT_PLUS_IO1
|
||||
* @arg @ref LL_COMP_INPUT_PLUS_IO2
|
||||
* @arg @ref LL_COMP_INPUT_PLUS_IO3 (*)
|
||||
*
|
||||
* (*) Parameter not available on all devices.
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_COMP_GetInputPlus(COMP_TypeDef *COMPx)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_INPSEL));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set comparator input minus (inverting).
|
||||
* @note In case of comparator input selected to be connected to IO:
|
||||
* GPIO pins are specific to each comparator instance.
|
||||
* Refer to description of parameters or to reference manual.
|
||||
* @note On this STM32 series, scaler bridge is configurable:
|
||||
* to optimize power consumption, this function enables the
|
||||
* voltage scaler bridge only when required
|
||||
* (when selecting comparator input based on VrefInt: VrefInt or
|
||||
* subdivision of VrefInt).
|
||||
* - For scaler bridge power consumption values,
|
||||
* refer to device datasheet, parameter "IDDA(SCALER)".
|
||||
* - Voltage scaler requires a delay for voltage stabilization.
|
||||
* Refer to device datasheet, parameter "tSTART_SCALER".
|
||||
* - Scaler bridge is common for all comparator instances,
|
||||
* therefore if at least one of the comparator instance
|
||||
* is requiring the scaler bridge, it remains enabled.
|
||||
* @rmtoll CSR INMSEL LL_COMP_SetInputMinus\n
|
||||
* CSR BRGEN LL_COMP_SetInputMinus\n
|
||||
* CSR SCALEN LL_COMP_SetInputMinus
|
||||
* @param COMPx Comparator instance
|
||||
* @param InputMinus This parameter can be one of the following values:
|
||||
* @arg @ref LL_COMP_INPUT_MINUS_1_4VREFINT
|
||||
* @arg @ref LL_COMP_INPUT_MINUS_1_2VREFINT
|
||||
* @arg @ref LL_COMP_INPUT_MINUS_3_4VREFINT
|
||||
* @arg @ref LL_COMP_INPUT_MINUS_VREFINT
|
||||
* @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH1
|
||||
* @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH2 (*)
|
||||
* @arg @ref LL_COMP_INPUT_MINUS_IO1
|
||||
* @arg @ref LL_COMP_INPUT_MINUS_IO2
|
||||
* @arg @ref LL_COMP_INPUT_MINUS_IO3 (*)
|
||||
* @arg @ref LL_COMP_INPUT_MINUS_IO4 (*)
|
||||
* @arg @ref LL_COMP_INPUT_MINUS_IO5 (*)
|
||||
*
|
||||
* (*) Parameter not available on all devices.
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_COMP_SetInputMinus(COMP_TypeDef *COMPx, uint32_t InputMinus)
|
||||
{
|
||||
#if defined(COMP_CSR_INMESEL_1)
|
||||
MODIFY_REG(COMPx->CSR, COMP_CSR_INMESEL | COMP_CSR_INMSEL | COMP_CSR_SCALEN | COMP_CSR_BRGEN, InputMinus);
|
||||
#else
|
||||
MODIFY_REG(COMPx->CSR, COMP_CSR_INMSEL | COMP_CSR_SCALEN | COMP_CSR_BRGEN, InputMinus);
|
||||
#endif /* COMP_CSR_INMESEL_1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get comparator input minus (inverting).
|
||||
* @note In case of comparator input selected to be connected to IO:
|
||||
* GPIO pins are specific to each comparator instance.
|
||||
* Refer to description of parameters or to reference manual.
|
||||
* @rmtoll CSR INMSEL LL_COMP_GetInputMinus\n
|
||||
* CSR BRGEN LL_COMP_GetInputMinus\n
|
||||
* CSR SCALEN LL_COMP_GetInputMinus
|
||||
* @param COMPx Comparator instance
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_COMP_INPUT_MINUS_1_4VREFINT
|
||||
* @arg @ref LL_COMP_INPUT_MINUS_1_2VREFINT
|
||||
* @arg @ref LL_COMP_INPUT_MINUS_3_4VREFINT
|
||||
* @arg @ref LL_COMP_INPUT_MINUS_VREFINT
|
||||
* @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH1
|
||||
* @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH2 (*)
|
||||
* @arg @ref LL_COMP_INPUT_MINUS_IO1
|
||||
* @arg @ref LL_COMP_INPUT_MINUS_IO2
|
||||
* @arg @ref LL_COMP_INPUT_MINUS_IO3 (*)
|
||||
* @arg @ref LL_COMP_INPUT_MINUS_IO4 (*)
|
||||
* @arg @ref LL_COMP_INPUT_MINUS_IO5 (*)
|
||||
*
|
||||
* (*) Parameter not available on all devices.
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_COMP_GetInputMinus(COMP_TypeDef *COMPx)
|
||||
{
|
||||
#if defined(COMP_CSR_INMESEL_1)
|
||||
return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_INMESEL | COMP_CSR_INMSEL | COMP_CSR_SCALEN | COMP_CSR_BRGEN));
|
||||
#else
|
||||
return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_INMSEL | COMP_CSR_SCALEN | COMP_CSR_BRGEN));
|
||||
#endif /* COMP_CSR_INMESEL_1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set comparator instance hysteresis mode of the input minus (inverting input).
|
||||
* @rmtoll CSR HYST LL_COMP_SetInputHysteresis
|
||||
* @param COMPx Comparator instance
|
||||
* @param InputHysteresis This parameter can be one of the following values:
|
||||
* @arg @ref LL_COMP_HYSTERESIS_NONE
|
||||
* @arg @ref LL_COMP_HYSTERESIS_LOW
|
||||
* @arg @ref LL_COMP_HYSTERESIS_MEDIUM
|
||||
* @arg @ref LL_COMP_HYSTERESIS_HIGH
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_COMP_SetInputHysteresis(COMP_TypeDef *COMPx, uint32_t InputHysteresis)
|
||||
{
|
||||
MODIFY_REG(COMPx->CSR, COMP_CSR_HYST, InputHysteresis);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get comparator instance hysteresis mode of the minus (inverting) input.
|
||||
* @rmtoll CSR HYST LL_COMP_GetInputHysteresis
|
||||
* @param COMPx Comparator instance
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_COMP_HYSTERESIS_NONE
|
||||
* @arg @ref LL_COMP_HYSTERESIS_LOW
|
||||
* @arg @ref LL_COMP_HYSTERESIS_MEDIUM
|
||||
* @arg @ref LL_COMP_HYSTERESIS_HIGH
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_COMP_GetInputHysteresis(COMP_TypeDef *COMPx)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_HYST));
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup COMP_LL_EF_Configuration_comparator_output Configuration of comparator output
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Set comparator instance output polarity.
|
||||
* @rmtoll CSR POLARITY LL_COMP_SetOutputPolarity
|
||||
* @param COMPx Comparator instance
|
||||
* @param OutputPolarity This parameter can be one of the following values:
|
||||
* @arg @ref LL_COMP_OUTPUTPOL_NONINVERTED
|
||||
* @arg @ref LL_COMP_OUTPUTPOL_INVERTED
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_COMP_SetOutputPolarity(COMP_TypeDef *COMPx, uint32_t OutputPolarity)
|
||||
{
|
||||
MODIFY_REG(COMPx->CSR, COMP_CSR_POLARITY, OutputPolarity);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get comparator instance output polarity.
|
||||
* @rmtoll CSR POLARITY LL_COMP_GetOutputPolarity
|
||||
* @param COMPx Comparator instance
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_COMP_OUTPUTPOL_NONINVERTED
|
||||
* @arg @ref LL_COMP_OUTPUTPOL_INVERTED
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_COMP_GetOutputPolarity(COMP_TypeDef *COMPx)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_POLARITY));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set comparator instance blanking source.
|
||||
* @note Blanking source may be specific to each comparator instance.
|
||||
* Refer to description of parameters or to reference manual.
|
||||
* @note Availability of parameters of blanking source from timer
|
||||
* depends on timers availability on the selected device.
|
||||
* @rmtoll CSR BLANKING LL_COMP_SetOutputBlankingSource
|
||||
* @param COMPx Comparator instance
|
||||
* @param BlankingSource This parameter can be one of the following values:
|
||||
* @arg @ref LL_COMP_BLANKINGSRC_NONE
|
||||
* @arg @ref LL_COMP_BLANKINGSRC_TIM1_OC5_COMP1 (1)(2)
|
||||
* @arg @ref LL_COMP_BLANKINGSRC_TIM2_OC3_COMP1 (1)(2)
|
||||
* @arg @ref LL_COMP_BLANKINGSRC_TIM3_OC3_COMP1 (1)(2)
|
||||
* @arg @ref LL_COMP_BLANKINGSRC_TIM3_OC4_COMP2 (1)(3)
|
||||
* @arg @ref LL_COMP_BLANKINGSRC_TIM8_OC5_COMP2 (1)(3)
|
||||
* @arg @ref LL_COMP_BLANKINGSRC_TIM15_OC1_COMP2 (1)(3)
|
||||
*
|
||||
* (1) Parameter availability depending on timer availability
|
||||
* on the selected device.
|
||||
* (2) On STM32L4, parameter available only on comparator instance: COMP1.
|
||||
* (3) On STM32L4, parameter available only on comparator instance: COMP2.
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_COMP_SetOutputBlankingSource(COMP_TypeDef *COMPx, uint32_t BlankingSource)
|
||||
{
|
||||
MODIFY_REG(COMPx->CSR, COMP_CSR_BLANKING, BlankingSource);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get comparator instance blanking source.
|
||||
* @note Availability of parameters of blanking source from timer
|
||||
* depends on timers availability on the selected device.
|
||||
* @note Blanking source may be specific to each comparator instance.
|
||||
* Refer to description of parameters or to reference manual.
|
||||
* @rmtoll CSR BLANKING LL_COMP_GetOutputBlankingSource
|
||||
* @param COMPx Comparator instance
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_COMP_BLANKINGSRC_NONE
|
||||
* @arg @ref LL_COMP_BLANKINGSRC_TIM1_OC5_COMP1 (1)(2)
|
||||
* @arg @ref LL_COMP_BLANKINGSRC_TIM2_OC3_COMP1 (1)(2)
|
||||
* @arg @ref LL_COMP_BLANKINGSRC_TIM3_OC3_COMP1 (1)(2)
|
||||
* @arg @ref LL_COMP_BLANKINGSRC_TIM3_OC4_COMP2 (1)(3)
|
||||
* @arg @ref LL_COMP_BLANKINGSRC_TIM8_OC5_COMP2 (1)(3)
|
||||
* @arg @ref LL_COMP_BLANKINGSRC_TIM15_OC1_COMP2 (1)(3)
|
||||
*
|
||||
* (1) Parameter availability depending on timer availability
|
||||
* on the selected device.
|
||||
* (2) On STM32L4, parameter available only on comparator instance: COMP1.
|
||||
* (3) On STM32L4, parameter available only on comparator instance: COMP2.
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_COMP_GetOutputBlankingSource(COMP_TypeDef *COMPx)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_BLANKING));
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup COMP_LL_EF_Configuration_Legacy_Functions Configuration of COMP, legacy functions name
|
||||
* @{
|
||||
*/
|
||||
/* Old functions name kept for legacy purpose, to be replaced by the */
|
||||
/* current functions name. */
|
||||
__STATIC_INLINE void LL_COMP_SetInputNonInverting(COMP_TypeDef *COMPx, uint32_t InputNonInverting)
|
||||
{
|
||||
LL_COMP_SetInputPlus(COMPx, InputNonInverting);
|
||||
}
|
||||
__STATIC_INLINE uint32_t LL_COMP_GetInputNonInverting(COMP_TypeDef *COMPx)
|
||||
{
|
||||
return LL_COMP_GetInputPlus(COMPx);
|
||||
}
|
||||
|
||||
__STATIC_INLINE void LL_COMP_SetInputInverting(COMP_TypeDef *COMPx, uint32_t InputInverting)
|
||||
{
|
||||
LL_COMP_SetInputMinus(COMPx, InputInverting);
|
||||
}
|
||||
__STATIC_INLINE uint32_t LL_COMP_GetInputInverting(COMP_TypeDef *COMPx)
|
||||
{
|
||||
return LL_COMP_GetInputMinus(COMPx);
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup COMP_LL_EF_Operation Operation on comparator instance
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Enable comparator instance.
|
||||
* @note After enable from off state, comparator requires a delay
|
||||
* to reach reach propagation delay specification.
|
||||
* Refer to device datasheet, parameter "tSTART".
|
||||
* @rmtoll CSR EN LL_COMP_Enable
|
||||
* @param COMPx Comparator instance
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_COMP_Enable(COMP_TypeDef *COMPx)
|
||||
{
|
||||
SET_BIT(COMPx->CSR, COMP_CSR_EN);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable comparator instance.
|
||||
* @rmtoll CSR EN LL_COMP_Disable
|
||||
* @param COMPx Comparator instance
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_COMP_Disable(COMP_TypeDef *COMPx)
|
||||
{
|
||||
CLEAR_BIT(COMPx->CSR, COMP_CSR_EN);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get comparator enable state
|
||||
* (0: COMP is disabled, 1: COMP is enabled)
|
||||
* @rmtoll CSR EN LL_COMP_IsEnabled
|
||||
* @param COMPx Comparator instance
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_COMP_IsEnabled(COMP_TypeDef *COMPx)
|
||||
{
|
||||
return ((READ_BIT(COMPx->CSR, COMP_CSR_EN) == (COMP_CSR_EN)) ? 1UL : 0UL);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Lock comparator instance.
|
||||
* @note Once locked, comparator configuration can be accessed in read-only.
|
||||
* @note The only way to unlock the comparator is a device hardware reset.
|
||||
* @rmtoll CSR LOCK LL_COMP_Lock
|
||||
* @param COMPx Comparator instance
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_COMP_Lock(COMP_TypeDef *COMPx)
|
||||
{
|
||||
SET_BIT(COMPx->CSR, COMP_CSR_LOCK);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get comparator lock state
|
||||
* (0: COMP is unlocked, 1: COMP is locked).
|
||||
* @note Once locked, comparator configuration can be accessed in read-only.
|
||||
* @note The only way to unlock the comparator is a device hardware reset.
|
||||
* @rmtoll CSR LOCK LL_COMP_IsLocked
|
||||
* @param COMPx Comparator instance
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_COMP_IsLocked(COMP_TypeDef *COMPx)
|
||||
{
|
||||
return ((READ_BIT(COMPx->CSR, COMP_CSR_LOCK) == (COMP_CSR_LOCK)) ? 1UL : 0UL);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Read comparator instance output level.
|
||||
* @note The comparator output level depends on the selected polarity
|
||||
* (Refer to function @ref LL_COMP_SetOutputPolarity()).
|
||||
* If the comparator polarity is not inverted:
|
||||
* - Comparator output is low when the input plus
|
||||
* is at a lower voltage than the input minus
|
||||
* - Comparator output is high when the input plus
|
||||
* is at a higher voltage than the input minus
|
||||
* If the comparator polarity is inverted:
|
||||
* - Comparator output is high when the input plus
|
||||
* is at a lower voltage than the input minus
|
||||
* - Comparator output is low when the input plus
|
||||
* is at a higher voltage than the input minus
|
||||
* @rmtoll CSR VALUE LL_COMP_ReadOutputLevel
|
||||
* @param COMPx Comparator instance
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_COMP_OUTPUT_LEVEL_LOW
|
||||
* @arg @ref LL_COMP_OUTPUT_LEVEL_HIGH
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_COMP_ReadOutputLevel(COMP_TypeDef *COMPx)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_VALUE)
|
||||
>> LL_COMP_OUTPUT_LEVEL_BITOFFSET_POS);
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if defined(USE_FULL_LL_DRIVER)
|
||||
/** @defgroup COMP_LL_EF_Init Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
ErrorStatus LL_COMP_DeInit(COMP_TypeDef *COMPx);
|
||||
ErrorStatus LL_COMP_Init(COMP_TypeDef *COMPx, LL_COMP_InitTypeDef *COMP_InitStruct);
|
||||
void LL_COMP_StructInit(LL_COMP_InitTypeDef *COMP_InitStruct);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* USE_FULL_LL_DRIVER */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* COMP1 || COMP2 */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32L4xx_LL_COMP_H */
|
||||
Reference in New Issue
Block a user